bluedmc777
Well-known member
I’ve had both the single and the stereo versions of those. Great pedals. I’ve made the rounds with almost all the rotary pedals and stuck on the old Boss RT-20 lol. Here’s a pic of the bigger DLS Roto-Spin.
What's on the workbench?
- Thread starter PedalPCB
- Start date
Nostradoomus
Well-known member
I’ve had both the single and the stereo versions of those. Great pedals. I’ve made the rounds with almost all the rotary pedals and stuck on the old Boss RT-20 lol. Here’s a pic of the bigger DLS Roto-Spin.
View attachment 117845
125B should work
Robert
Reverse Engineer
Did you try the ole wet sharpie on dry sharpie and wipe?Well I would, but they Sharpied over all the part numbers....
you can encase it in concrete, epoxy, goop or asbestos and Robert will hack it off,Well I would, but they Sharpied over all the part numbers....
you can add extra parts, fake traces, hidden vias and all sorts - and Robert will work it out
you can hide bits under the jacks, and they will be found,
but if you have a sharpie, you will defeat him!
DeadAirMD
Well-known member
I’ve had both the single and the stereo versions of those. Great pedals. I’ve made the rounds with almost all the rotary pedals and stuck on the old Boss RT-20 lol. Here’s a pic of the bigger DLS Roto-Spin.
View attachment 117845
........................R.........................R129..................R129?!?!? Da fuck?
My carpet would be 90% smd resistors and 10% lint. When are you starting the tracing @Robert? Good times!
I'll be honest - if I opened that up to trace, unless it was like the most amazing sound ever it would be being put back together and put on a "life is too short" list.Here’s a pic of the bigger DLS Roto-Spin.
Which might be what Robert's coffee box is?
bluedmc777
Well-known member
bluedmc777
Well-known member
He isn’t that I’m aware of it’s a pic of the DLS Roto-Spin that I posted as a joke. I believe he has the Option 5 destination single but I don’t know if he has plans to trace it or not.
analog_bham
Well-known member
write with a dry-erase marker over the sharpie and the sharpie will come off. One of my favorite tricks.Well I would, but they Sharpied over all the part numbers....
bluedmc777
Well-known member
Quicklime Girl finished up. Circuit by ChuckD
