Matopotato
Active member
I have a humble request for those who built the King Nothing.
I have read schematics, checked Tayda link and asked around to try and understand what type of DPDT swich to use. On/on/on is clear, but it comes in two different topologies:
The naming of which one that is "type 1" vs "type 2" is not always consistent, so I just added the picture for reference.
I wonder if any of you King Nothing builders would be so kind as to check with continuity meter (or ohm meter), with the pedal removed from power, what the case is when the DPDT is in the middle position? Which pins get connected?
Thanks in advance.
I have read schematics, checked Tayda link and asked around to try and understand what type of DPDT swich to use. On/on/on is clear, but it comes in two different topologies:
![1724574268601.png 1724574268601.png](https://forum.pedalpcb.com/data/attachments/80/80759-9428d189fc30794aa2884103c7ee10fc.jpg)
The naming of which one that is "type 1" vs "type 2" is not always consistent, so I just added the picture for reference.
I wonder if any of you King Nothing builders would be so kind as to check with continuity meter (or ohm meter), with the pedal removed from power, what the case is when the DPDT is in the middle position? Which pins get connected?
Thanks in advance.