Wire pedal without footswitch.

[Bloodshotben]

I'm working on a Boogie Monster build and I'm wondering how to go about bypassing a footswitch altogether. I imagine wiring the input and output to their respective spots on the pcb would work, but what about the GRD and SW spots. Would a jumper between them be the solution? Am I totally thinking wrong in general about this approach? I'm considering wiring this straight into a TPA3118 board eventually, but even if I don't go with that I'd like it to be always on when powered.

 

[BuddytheReow]

The switch spot you can simply ignore if no led/footswitch

 

[Nostradoomus]

You can leave the G and SW empty, they’re just for the LED switching. In and Out to their respective jacks and you should be good to go.

 

[Bloodshotben]

Outstanding thank you two for the responses! This is my first time posting a question here and did not expect such a quick answer.

 

[Danbieranowski]

Outstanding thank you two for the responses! This is my first time posting a question here and did not expect such a quick answer.

Welcome! This is a very responsive group so if you have any questions feel free to post them up. Otherwise, I’d highly recommend reading this for the fun of it: https://forum.pedalpcb.com/threads/basic-workflow-tips-for-building-a-pedalpcb.1165/