Wrectifier- Triple X

[Mcknib]

Reverse etched and believe it or not this is all the same colour 1 solid 1 translucent both Montana Gold Cherry Blossom

Translucent on bare metal = pink

I usually do the etch in black and spray over it with the translucent adds a wee bit of easy colour to your etch

Great sounding pedal with some screaming gain

I haven't got 5 knobs that'll fit all the differing pots but hey it's for a metal head so I'll give him more....

metal!


Now with knobs on

 

[PapaBear]

Looks great

 

[Danbieranowski]

Looks great! Just got a Boogie Monster board in the mail today. Looking forward to building one of those and one of these and comparing the two.

 

[Mcknib]

Working voltages

Although this is a straight forward one ie we know VREF is around half the power supply and op amps require that for biasing

I thought I'd post working voltages which I'll do with any other working ppcb builds for reference

Maybe a good idea to post working voltages as part of a build report especially for the more complex circuits

Power in 9.38v

IC1
1. 4.56
2. 4.56
3. 4.36
4. 0
5 4.36
6. 4.56
7. 4.56
8. 9.12

IC2
1. 4.55
2. 4.55
3. 4.55
4. 0
5. 4.55
6. 4.56
7. 4.58
8. 9.12

IC3
1. 4.55
2. 4.55
3 4.36
4. 0
5. 4.55
6. 4.55
7. 4.55
8. 9.12

 

[Chas Grant]

Looks great, the pink is something different on a pedal, but not bad at all. Might have to do one!

 

[Danbieranowski]

Working voltages

Although this is a straight forward one ie we know VREF is around half the power supply and op amps require that for biasing

I thought I'd post working voltages which I'll do with any other working ppcb builds for reference

Maybe a good idea to post working voltages as part of a build report especially for the more complex circuits

Power in 9.38v

IC1
1. 4.56
2. 4.56
3. 4.36
4. 0
5 4.36
6. 4.56
7. 4.56
8. 9.12

IC2
1. 4.55
2. 4.55
3. 4.55
4. 0
5. 4.55
6. 4.56
7. 4.58
8. 9.12

IC3
1. 4.55
2. 4.55
3 4.36
4. 0
5. 4.55
6. 4.55
7. 4.55
8. 9.12

Great idea!