What’s on *YOUR* workbench?

Soldered the last few components on my dream fuzz with my new PACE!!! It works like a charm. I feel like I went from a blunt rusty wooden knife to a Japanese chef knife! And I am looking forward to building this pedal. I’ll probably drill the enclosure over the holidays.

Thank you again @fig!
 
I've been a wet noodle lately......
I thought I should look that up as I was going to say there's a Pill for that! :)
Never heard that saying, you learn something new everyday.
I just realized I wont be getting any PCB's til next Wednesday, Monday & Tuesday are Public holidays here.
When you retire, everyday is a Holiday so you start forgetting what day it is til somebody reminds you!
 
Sunface and Fuzzface. Now testing different silicon transistors for the Sunface (breadboard and pcb in the right bottom corner).
FF is next, on a diy turretboard-like board. I have some 107/108/109 A/B/C cans and some other, big can trannies. Not an easy taks to pick the best sounding pair.

1703609479294.png
 
Ok so here’s my first first ever mill job. Although it’s a failure because it didn’t cut all the way through I still think it came out really good. Figured out the CAM side of things took a bit but it paid off! I’m going to make some adjustments with the height zeroing and that should fix this problem! Looking forward to seeing what the enclosures will come out like when I get it right!
IMG_2358.jpeg
 
Last edited:
Back
Top