derevaun
Well-known member
Just saw this on Instagram! I doubt any of us are unaware of the caveats.
PSA: Moonn Pride Month Sale = 22% Off
- Thread starter derevaun
- Start date
Mentaltossflycoon
Well-known member
sticky1138
Well-known member
He has a bunch of tiny PCBs than are fun and easy to use as add-ons/2-in-1 builds. Throw a boost or an octave on it? Why not.
The Good Vibes (Magnatone vibrato) was the best of the 15 or so that bought.
The Good Vibes (Magnatone vibrato) was the best of the 15 or so that bought.
Mentaltossflycoon
Well-known member
Tons, mostly dirt/fuzz circuits. Though I don't use them much, I enjoyed some of the vintage euro fuzzes a lot. I'm forgetting the project names but the sinfhoton and hofner are the main ones. Lots of escobedo strangeness like the ugly face, try hard and schwurbel. Been using both a cinnamon roll and an octomix a lot lately, though both were wired in parallel with more bass friendly fuzzes. The Lofran is one of my favorite bass fuzzes and the only other place to get that pcb is fuzzdog.
I agree with @sticky1138 Good Vibes is definitely worth building. Especially if you want some modulation and are intimated by the VIIB. Sir wobblington is less useful but also interesting/ it's own thing.
Last edited:
Zennmaster
Well-known member
Oh, wow. I hadn't heard of this guy before, but I love the PCBs!
Hal Harvey
Well-known member
I ordered 17 plus the pride pack. Hoping no dupes 
The Devi boards I’ve been meaning to order for a long time… I’m running out of room to store the cat hair I’ve been saving up for these.
The Devi boards I’ve been meaning to order for a long time… I’m running out of room to store the cat hair I’ve been saving up for these.
Fama
Well-known member
I'll probably skip the pride pack this year since I still have most of last year's pending (I do have an enclosure coming for one of them though). But I might pick up one or two things.
Any suggestions for something with 3 pots and a switch, or something along those lines? I've got an extra Fuzz Cadet enclosure where the print failed I need to figure something out with.
Any suggestions for something with 3 pots and a switch, or something along those lines? I've got an extra Fuzz Cadet enclosure where the print failed I need to figure something out with.
Fama
Well-known member
Come on now, I've managed to cut my backlog down *quick calculations*... how the fuck am I back at 37 when I thought I haven't bought any new ones?
drgonzo1969
Well-known member
Hahaha 37 is pretty reasonable….
p_wats
Well-known member
I started keeping a spreadsheet eventually, so I stop buying the same ones by accident. Ha
Let's also not talk about the pile of populated and tested PCBs I just can't be bothered to box up (I imagine a lot of us can sympathize there)
Zennmaster
Well-known member
Among all the other things, this thread has been a wonderful group therapy session for me. Thank you all. 
derevaun
Well-known member
I accidentally didn't change the country from Afghanistan to USA, and shipping was $9. I emailed Nils about and am waiting for a reply when he gets around to it. If you haven't read the various threads about Moonn, it's important to take into account that he can be very slow to ship or even to communicate. It has always ultimately worked out fine for me, but definitely a caveat.
Mentaltossflycoon
Well-known member
Never had an issue like that, just expect to wait like 1-2 months to receive your stuff.
Feral Feline
Well-known member
I might forgo the Rainbow pack this year, 'cause I've got some very specific druthers that were out of stock last year or would've pushed my order into an expensive tax/duty bracket.
So far I've got nearly €100 in the basket already, for a few days now, while I ponder what PCBs I reallywant need.
So far I've got nearly €100 in the basket already, for a few days now, while I ponder what PCBs I really
comradehoser
Well-known member
Dromtydning, space is the place, Bagheera, and aglio e olio would be my noms, but I haven't built a huge range of his catalog
