smallbear-electronics.mybigcommerce.com
PedalPCB : The Creamery Compressor - Available Now!THAT2159 :
V2159D VCA IC SIP-8
New England's source for guitar pedals, pedal parts and electronics.
View attachment 13355
+1 - even without proper build docs yet at least I can get an order going.
Is the 2N4124 the same thing as the MPS4124? If so, Smallbear has them.
smallbear-electronics.mybigcommerce.com
I guess I could live with that - I'm sure I could find knobs I like.Small bear has them in center detent.16mm Right-Angle PC-Mount Song-Huei 16K6 Series
Guitar pedals, pedal parts and electronics.
You can use set screw knobs. I take the little anti-rotation tab that gets removed and push it in-between the splines so that they don't squish under the set screw pressure.
Great tip!
If you’re not crazy about the center detention part but still okay with splines shaft, Tayda has 65 in stock:
www.taydaelectronics.com
Okay, I thought center detention meant the split. Now I'm confused. Can you explain detent vs non?If you’re not crazy about the center detention part but still okay with splines shaft, Tayda has 65 in stock:
100K OHM W-Taper W100K Tone Control Potentiometer Spline Shaft PCB Mount
ALPHA - Get It Fast - Same Day Shipping
also, given my experience with the milkbox, while the w taper is nice to have, a linear taper should still be easy to dial in any settings for
It means that it has a physical click at the halfway point in its rotation. It’s typically something you’ll see in an active equalizer circuit where the midpoint is flat, clockwise is boost, and counter clockwise is cut. It’s not a significant click, but just a little tactical feedback to let you know when you’re at the exact 50% point
