The pot goes from 0 to 100. I have pretty much gone through all the basic troubleshooting, so I think the problem might be a little more outfield. Correct me if I'm wrong but doesn't the pot change the current going to a capacitor which changes the center frequency? What would be that capacitor...
Alright, so I am getting 3.7 volts on the emitter of q2 and 65mv off of q1e. I don't really know what you mean by q3e. Also, the gear is tight, the knob is definitely turning. Thanks Chuck!
Hello. I recently completed my tearjerker wah and the pedal does the "wah" but the pot has no effect on the filter freq. The dip switches change the frequency and the trim pots do everything they should. I triplew checked that everything was wired right, reflowed, etc.. The pot is functional...
I have pretty exhaustively checked all the posts on the photon vibe. The lfo seems to be working, albeit not perfectly. I bought my tc1044scpa from small bear, yet in all my builds that use it (delegeate compressor as an example), there is a very pronounced whine. When I plug it in no effect is...
https://photos.app.goo.gl/ptCC7qeCia1XuNtc6
Hello. I recently finished the photon vibe. I have a suspicion that my voltage regulator burned out. IN the early power part of the circuit I get no more than 15 volts instead of the 18 it is supposed to be. I cleaned my board with isopropyl and double...
Im pretty sure I burned the l78l15 out. I couldn't see any shorts around it that would cause it to burn. Could you let me know if you see anything weird? https://photos.app.goo.gl/ptCC7qeCia1XuNtc6