Search results

Success! I replaced c14 and it works now. Thanks for the insight :-)

*0 to 100k I meant

The pot goes from 0 to 100. I have pretty much gone through all the basic troubleshooting, so I think the problem might be a little more outfield. Correct me if I'm wrong but doesn't the pot change the current going to a capacitor which changes the center frequency? What would be that capacitor...

Alright, so I am getting 3.7 volts on the emitter of q2 and 65mv off of q1e. I don't really know what you mean by q3e. Also, the gear is tight, the knob is definitely turning. Thanks Chuck!

Hello. I recently completed my tearjerker wah and the pedal does the "wah" but the pot has no effect on the filter freq. The dip switches change the frequency and the trim pots do everything they should. I triplew checked that everything was wired right, reflowed, etc.. The pot is functional...

what do the trimpots do

The red fasel inductor is 500mh right? I cannot find the specs anywhere

you are probably trying to put it into the furthest spaced holes instead of the red and green circled by another member

The fasel fits for sure

Did you ever try that tl072

I have pretty exhaustively checked all the posts on the photon vibe. The lfo seems to be working, albeit not perfectly. I bought my tc1044scpa from small bear, yet in all my builds that use it (delegeate compressor as an example), there is a very pronounced whine. When I plug it in no effect is...

I would like to check out all the vref points on my pcb, but I don't know that the voltages are supposed to be. Thoughts on where I can find them?

https://photos.app.goo.gl/ptCC7qeCia1XuNtc6 Hello. I recently finished the photon vibe. I have a suspicion that my voltage regulator burned out. IN the early power part of the circuit I get no more than 15 volts instead of the 18 it is supposed to be. I cleaned my board with isopropyl and double...

Im pretty sure I burned the l78l15 out. I couldn't see any shorts around it that would cause it to burn. Could you let me know if you see anything weird? https://photos.app.goo.gl/ptCC7qeCia1XuNtc6

Mine is pretty noisy too

max 1044

I couldn't help but notice that you put your voltage regulator upside down, in respect to the board that is. I put Ic 5 with the flat part facing upward and my pedal is whining, so I guess the pcb is wrong. Have any of you guys noticed that?

In my experience it gets super fizzy when you're all the way out in the 600ms range. values under that sound normal

https://photos.google.com/share/AF1QipOMruTQf8zAzQvBuICpHIrIAmbqcOGJU9I9yL40MHBaGNL6ws0H6JPJ9gGIMQ97nA?key=LThZSkxtZjFoWlVOUGVJczhUNWJubTlwM0t6UE1n Hello. There is continuity between all grounds, dual gong pot is isolated, op amps are the right way in, and there doesn't appear to be any solder...

https://photos.google.com/share/AF1QipOMruTQf8zAzQvBuICpHIrIAmbqcOGJU9I9yL40MHBaGNL6ws0H6JPJ9gGIMQ97nA?key=LThZSkxtZjFoWlVOUGVJczhUNWJubTlwM0t6UE1n Hello. This pedal has a very pronounced noise. I checked continuity between grounds and everything looked good. I put 4 layers of electrical tape...