After successfully rebuilding my version of the Ashly SC-40, I came up with the idea of converting my long-used Ashly SC-50 into a pedal too.
The factory schematics can be found on the Internet. My goal was to fit everything into a 125 BB housing. And everything should be made with conventional through hole components.
So I used the schematics to create a pcb.
Next, assembling the pcb...
The factory schematics can be found on the Internet. My goal was to fit everything into a 125 BB housing. And everything should be made with conventional through hole components.
So I used the schematics to create a pcb.
Next, assembling the pcb...
Attachments
Last edited:
