What's on the workbench?

[Robert]

Well shoot dang, my EDA won't let me rotate the hatching on the bias :|

DipTrace gives a few different styles as well as width/spacing controls for the individual lines.

 

[Aleph Null]

Well shoot dang, my EDA won't let me rotate the hatching on the bias :|

Set preferences to allow 45° rotation of parts, [Ctrl]+A, rotate everything, add hatching, rotate back.

 

[Laundryroom David]

Surely we can all behave like adults...

new here?

 

[jwin615]

How do the pixies know where to go on a crosshatch ground pour? Little bastards are just guessing at every turn.

 

[jessenator]

DipTrace gives a few different styles as well as width/spacing controls for the individual lines.

View attachment 126911

Set preferences to allow 45° rotation of parts, [Ctrl]+A, rotate everything, add hatching, rotate back.

My EDA is old, German, and Germanically pedantic. Even a 30* rotation and it insists that 90* grid lines are what is proper.



Do I have to blow the whistle on myself now?

 

[Aleph Null]

My EDA is old, German, and Germanically pedantic. Even a 30* rotation and it insists that 90* grid lines are what is proper.
View attachment 126912


Do I have to blow the whistle on myself now?
View attachment 126913

Time to hand draw your gerbers, then scan them in!

 

[Robert]

My EDA is old, German, and Germanically pedantic. Even a 30* rotation and it insists that 90* grid lines are what is proper.

Can you import a black and white image as a copper or keepout layer? If so you can make it any shape or pattern you want, paisley if that's your thing.

Just make sure everything connects properly.

 

[Big Monk]

Surely we can all behave like adults...

"This trace is completely wrong. There is only one male header row attaching the footswitch and the voltage is 100mA off."

 

[Robert]

 

[Laundryroom David]

Watcha up to there?

 

[jwin615]

Watcha up to there?

Probably repeating "it's okay if it's not symmetrical" while curled in a corner

 

[Laundryroom David]

Probably repeating "it's okay if it's not symmetrical" while curled in a corner

I was going to make a comment about forgetting whatever’s supposed to go on the right side of that board but didn’t want to be cruel this early in the day. I ease into cruelty on Sundays.

 

[music6000]

That's why I don't like working with Pictures supplied about a circuit!???
Hold your pointer on the Picture!

 

[jessenator]

That's one big ass relay
/S

 

[Robert]

Watcha up to there?

Well.... it was supposed to be auto-tune for guitar but this is what came out:
View attachment Autotune.mp4

 

[jessenator]

It's not a 4-knob YATS?

 

[Aleph Null]

Well.... it was supposed to be auto-tune for guitar but this is what came out:
View attachment 127091

If there's a market for the Miku pedal, I'm sure there's a market for this!

 

[music6000]

Well.... it was supposed to be auto-tune for guitar but this is what came out:
View attachment 127091

Is the Bottom left pot for Bias, try adjusting that???

 

[Fama]

Well.... it was supposed to be auto-tune for guitar but this is what came out:
View attachment 127091

Not gonna lie, a Miku-clone with custom audio file would dominate the gag gift market.

 

[Aleph Null]

Not gonna lie, a Miku-clone with custom audio file would dominate the gag gift market.

If you can get an FV-1 to do it, maybe have a Miku mode and a fart mode.