Search results

I had asked in another thread about a schematic but starting a new one that is more explicitly about my issue. Getting bypass just fine, LED works fine, also getting voltages on the ICs as well. No sound when engaged however. I know will be limited without a schematic but here is a picture...

Measured all the voltages, not the best at interpreting datasheets but I *think* I am getting what I should for each. here is an image too. IMAGE

yeah good idea on the ICs, ill check those and try to get a pic as well

engaged, bypassed is fine

is there a schematic available? no sound on my build so I need to get to tracing

ok well that makes sense then, just wast sure. thanks!

the more I dial in octave the more fuzz I am getting. maybe this is normal, not sure? with a little octave it's like a little farty fuzz, which doesn't seem right. def getting some octave effect as well with the fuzz addition. guess the question is should the octave also add fuzz?

ah thanks, totally missed that

Are the drill templates available? looking to get my enclosure design started. very excited about this one!

THANKS!

Cant wait for this one, any chance you have a list of components so I can start stocking up?

so I measured and here are the values Q1-C = 1.30 Q1-E = 1.94 Q2-C = 2.81

welp.....

Built the Percolation Station with 2N2907A and PN3565. I am getting a real volume drop unless I crank the pedal well past noon - nearly 3 or so. Is this normal for this circuit or could it be my choice of transistor replacements?

You know what the 022 is on the build docs. I must have read it wrong or something....

It is an 072. Thanks for the reco on the others will give them a try on my next order

Getting some noise that matches the rate but only when the lag knob is turned up. Noise is at the speed of the rate knob and volume is proportional to the lag knob. Also getting a little bass loss when using the pedal (maybe this is normal with chorus, I’ve never used one) have attached the guts

Thanks for this. I’ve built several and wish I had read this earlier. Will def be implementing some of these techniques. If getting components from somewhere reputable how necessary is cleaning each lead?

Thats an expensive board

This looks nice, it’s just the board right? Not the jacks, power input etc?