Search results

Same here but the pedal is so great it’s like it holds the best tones and the worst tones in one pedal… it wouldn’t be so bad even with the momentary switch but the volume and all the other knobs need to be adjusted as well they are not even close to forming a good sound. But the pedals is...

I have a question? I just built this cannon fodder mk1 and it sound really really great!!!! until I flick the havok switch and then it’s it sounds horrible the volume and the gain need to be turned down and then it sounds like a weird synthesizer is this normal? I would like to hear someone’s...

……… ………..

Yup I just figured it out!!! I labeled my bag wrong … damn this Is not the first time this has happened! Thanks for all the insights …

Yeah the led turns on the power plugs wired right… I did have trouble with one of the resistors… I put all of the resistors in at once and when I flipped the pcb over r21 slid out a half inch and I soldered it bent and I slowly heated each side and slid the resistor down flush I’m thinking I...

Yeah the led is just in there for a test not solder.. I replace the ic and nothing k was wondering if the trans the 2n5088 may have cooked Im going to poke around with the dvm tomorrow

I just put together the comprehensive drive and and when I went to use it there’s no sound but it has sound when the pedal is off. Here’s the question I noticed after I had plugged in this pedal that I had the 4558 ic upside down o was wondering if I may have burned out some component. Also I...

I hope so I can’t wait..

Will there be a Fourth of July sale? If so I will wait to order… 💥 fireworks 🎇 fireworks 🎆

What else can I use besides a Mp38a I put a oc40 in it 97hfe I also have a bunch of ac176s and I put some bc107’s I had I didn’t have any bc107b’s … with the oc40 in it I can hardly hear the pedal with the amp cranked… the bias on the transistor won’t go below 6.0v is there a resistor to change...

I was wondering about pedal pcbs muffin fuzz if there was specs listed for the ram horn version. 🐏

I know he stopped sending information when he figured out he would have had to unsolder the 9v input… it was a waste of time and money… he refunded a little bit back to me

Ohhh very interesting…I tell you it’s not worth the 500-700 dollars they go for but nothing is worth the money theses days.. pedalpcbs ACTUAL OVERDRIVE is one of my favorite overdrives. i use my magical secret diodes… here’s a clue…. Not Telling Everyone…

I don’t think there’s any components underneath besides the potentiometers … it’s just a bummer he wouldn’t take the 9v input out so I could get a picture of the underside… I was wondering if this was a common type of circuit … no op amps just one electrolytic two transistors two diodes 9...

Elvis Cortez “left alone” and Tim Armstrong “rancid,transplants,operation ivy and head cat @ hellcat records” supposedly built them.

On reverb there were two pedals that were for sale by a music shop. The pedals were originally sold by one of my favorite bands and they only made a 100 of each and they are very expensive if they come up for sale… so I emailed the seller of these pedals and asked him if he could take pictures...

Yes ONLY if you have a true bypass PCB I HAVE PCB 151 it’s not the true bypass updated circuit… I’m kinda bummed I just ordered this thing like week and a half ago..

That’s what I’d like to see! Thank you I will give that a try..Robert you are the man! Wait … so the one in my picture below is not a true bypass pcb correct?

I’m having trouble with this as well the pedal is working but NO TRUE BYPASS. I have the updated pcb but there’s nothing in building documents. . How about a technical drawing?… I have also tried to do this with a 3pdt pcb and had no luck… I have a few thoughts on what to do here but I...

the special K calls for D9K diodes.. D9K diodes have the Stripe or stripes on the anode positive side…here’s is the question is the print on the pcb accurate to the D9k diode or is accurate to most other no Russian diodes? I have installed them both ways But I just wanted to know for sure what...