Search results

the threading can be a bit loose on some, I will also epoxy the nut if needed. ~ cannot have a loose jack

anyone have issues with these from Tayda? so far they seem solid. I have had an issue with the plug not being pushed in all the way a couple times, seemed as it was all the way in. Thanks,

the 250 hit the spot, completed the circle of what I was looking for. Thanks

Changes made; C2 ~ 8n/18n on a switch, C3 47n to a 100n, C5 1n to a 2n2. Diodes (2-4148’s standard, 1n34a x2 1N4001×2 on a switch,) the 34a's had a high forward voltage, 34a's both in line reads 910 and the 4001's 1.080. this is what I was looking for. Thanks, for all the input.

leaning towards the 250, I also have a Benson Preamp and it kind of sits in this camp on tone, which I like. Thanks, for all the input.

Yes, I have discovered this ~ interesting! Thx

opps, I updated thread post, I had an old 70's mxr+ the DOD250, I've not tried one. Thx

Hello, These are what I consider old style and what I've built or have owned: (**what I've built noted.) Kingsley Page V2 - Saturn VI - Simble OD - **Landgraff OD - **Charlie Brown V4 - **Protein Blue side - **BB/POT derivative - Vertex steel string SRV - Mythical Overdrive VS - **Klon Centaur...

Thx, for all the input, special Thx to Coda, "Nailed it! "and" it will get close enough in the Tonebend-ish realm, so I'm happy. needed this for my small board.

What amp is he using? The Red Snapper/PCB-Red Herring is a nice pedal, will work for this with the dirt dimmed.

+1 on the Rat I just finished one last month, I think that’ll fit the bill well, has plenty of drive/dirt.

leaning toward the Trombetta/Trumpeter, the Kazoo also is a close 2nd. tones ~ something like the Jack White/James Bond Theme song Thanks!

I have the TB MKII Pro, BA Scarab Deluxe/Dung Beetle and a Dover Drive/kinda fuzz.:sneaky: currently, too many combo pedals and needs to be a one slot-er for the board. I will check the Trombetta, could not find the Zipper ~ odd............. though we do have a Hawaiian/Polish restaurant ~...

Hello, I'm looking for a Fuzz that can go to Woolly Mammoth island and also travel to Tone Bender desert, and in between. Woolly Mammoth being the more wanted tone ~ also not exceeding (4) knobs. Thanks,

Yes, if you stagger the jacks allowing pedals to be closer it works, for me, most of the time I'm not able to make it work being that the next pedals in, is the same as the 1st pedals out, so then there is that big space between the pedals or one is an inch/25.4mm higher/lower than the other...

I'm sure you could make it in a 1590a "tall" enclosure. I personally try to avoid small enclosures, by the time you add a jack to both sides it is actually wider than a 125b with jacks at the top.

Thanks, here is a McCoy layout w/Halo and a Red on a switch. I've started using Clear Gorilla glue, it finishes like glass, using a thick coat in warm weather it lays out nice.

Thanks,

Chop Shop Son of Ben Preamp Pro-10 Green Overdrive really like all three! I stack pedals, so it is like a buffet of tone! I believe I'm at approximately 20 drives built from last Sept.

So it is done and sounds really good!