Search results

Thanks. Yep, just a set of stamps with hammer and anvil I found at a craft store.

I got these PCBs a little while back not realizing how similar they are. I had heard the Zendrive was great, and I had tried an Ultraphonix that I liked, so I wanted to try both. Maybe someone a little more knowledgeable can chime in, but it seems like the Ultraphonix is a pretty blatant...

Also can sub an A100K with a couple other substitutions. See https://forum.pedalpcb.com/threads/this-week-on-the-breadboard-blues-driver-bd-2-bd-2w-part-4.7544/

Built three Kliché Minis and I like how they turned out. Got the polished enclosures from Small Bear. I finished them and boxed them up with standard footswitches before realizing… damn I gotta get gold footswitches on these things! Didn’t even try desoldering the footswitch PCBs off of the...

I’d also recommend the Wampler Pantheon / PedalPCB Parthenon. Boosted output and more controls.

Gotcha, I’ll bring it in to work and try it out on an AC30. Thanks!

It’s a bit hit or miss - I’ve found that for some reason the blue and purple ones don’t chip as much. The hammer, anvil, and stamps I bought at a craft store. They’re meant for jewelry.

I’m pretty sure I got them from small bear. Looks like they don’t have them exactly, but they do have the knurled version here: https://smallbear-electronics.mybigcommerce.com/knurled-colored-caps/

Actually it’s metal stamps, with a hammer and anvil.

Thanks, seen a couple people doing something similar. It’s borne out of laziness. Half the time I’ll stamp the powder coat and it will chip, so when that happens I just sand down the whole top.

I did actually! Didn’t really know what I was looking at…

Had a request from a friend visiting from overseas to build a her a Blues Driver before going back home. Thanks to PedalPCB, Tayda, Small Bear, and the good ol’ USPS, I got all the parts and built it in under two weeks! Luckily finished it the day before her flight. It sounds great. I was able...

I was interested in this pedal because one of my favorite guitarists, Jeff Parker, uses it as his main drive pedal. It was a quick and easy build. Can’t say I’m too stoked on it though - when sustaining notes it kind of fizzles out, and when the drive is up high, it loses a lot of high end...

Built this a year ago or so and it had some funky noise problems. Just recently went back and reflowed some suspect solder joints and also realized that one of the pots was probably bad. Not sure if I overheated it or what. Replaced the pot and now it sounds great!

Hmm Eras + Ages would make sense

I also meant A100k! I’m all mixed up. Trying to put the kids to bed and plan out pedals at the same time.

I did. Thanks!

Hey Chuck. In a pinch here and I thought I’d ask - I’m using a dual gang b100k and subbing the resistors and caps, but I don’t have a 620p. I do have 680 and 560. Any opinion on whether it will matter, and if one of those is preferable? Thanks!

Metal stamp set with hammer and anvil, then filled in with a paint pen. Bit risky because it sometimes just chips away powder coating - if that happens I usually just sand off the top! Seems like only blue enclosures don't chip..

Built this one a few weeks ago but it didn’t work - there’s was no modulation going on, and the LED wasn’t pulsing either. I could kind of hear some modulation when moving the knobs around. So last night I went back and reflowed some subpar solder joints - and now it works! One other note - I...