Search results

I saw in the news USPS is so underfunded it is cutting pensions now--expect shipments and service to get worse now as workers get fed up even more leave. My mom is still waiting for her IRS tax return from 2024. I guess this is what happens when your government chooses to not fund the government.

From Aion docs, pick an hFE between 65 to 100, and leakage < 300μA. This circuit is pretty forgiving though, I tried some in that range, but ended up using an hFE of 130 because it sounded just as good. I used a 10K bias trimpot. Although I haven't tried a Beano I suspect one you build should...

Wow, so while they say they keep the signal in the analog domain, their block diagram shows that they convert from A->D then back D->A, then into their analog circuit, then A->D and D->A again. Why do it in the analog domain if you're going to go through two ADCs?

I thought those were persimmons. Welcome. Now that you're here stay for the fun.

A long time ago (my first guitar) I put a Seymour Duncan JB Jr. in my bridge. I don't recall what it sounded like, but I had no complaints about it.

the only other thing I can think of is some germanium diodes have the indicator backward from silicon diodes

Maybe I didn't put the <sarcasm>proper tag</sarcasm> in my post. He's the designer and engineer known for *checks notes* Klon clone, MT10 clone, TS10 clone, ...

Oh shit, Harby Pedals is from THE Joe Harby??!!! If he was really into making these in an "affordable format", wouldn't he use regular enclosures? When your cheapest pedal is a $250 tubescreamer, that doesn't really scream affordable. And it doesn't seem like he's gouging the consumer, but...

double check the pinouts of the mosfets--that's bitten me a few times.

In my tayda drill templates, I used 5.9mm when I have an 3mm LED bezel. When drilling by hand, I use a 15/64 bit.

If I'm reading that Tillman schematic correctly, normally you'd set the R3 value so your drain voltage is 1/2 your power supply.

Is there some connection to Wampler here I'm not seeing? I don't know about this aspect of the course "You want an established framework to use AI to successfully build anything you can dream up" If I want to learn something, I don't want AI doing it for me. Other than that it does look...

Directly from the article: The upshot is that while this preamp circuit is designed to work with typical J201 FETs, it will not work with all of them and it would be a good idea to try a handful of FETs and throw out any that don't bias correctly. An easy test is to measure the voltage at the...

I don't usually use lead free solder, but I remember the first time I tried it (with a brand I don't recall), I had a hard time. And when later I tried with the Kester brand it worked much better--it could've been that my skill improved in the gap in time, but it could also be brand (or...

Rangemasters have a high impedance output (and thus usually interact or loads with whatever comes next) so you might just be losing a bit of oomph by going into the buffer. You might also be clipping the buffer, especially if it's not biased evenly, causing more perceived volume loss. Are you...

I use a screwdriver looking tip. I also prefer the 63/37 solder, been so long since I used the other stuff I forget what it's like. I find I don't need to run my iron higher than 550F for most things (using leaded solder)--I only go above if using lead-free solder, or I'm soldering to a part...

Barbershop immediately jumps to mind--one of my favorite overdrives, and I would call it a low-gain fuzzy OD. Another option is the Tubebender. If you want one that more straddles the line of fuzz than OD, then Fuzz Aldrin.

We strive to build like Chris, not be like Chris.

Did you look at the schematic for the BYOC Brown Face Tremolo? If so you'll see that it is not compatible with the bypass switch you are using--which is why the stripboard diagram tells you how to wire it directly to the switch rather than just specifying input and output like other circuits...

Did you get balls deep though?