Search results

i built one a while ago and love it very much .im happy to hear your getting more of these PCB ive been wanting one for a while. i was wondering did you guys make any changes to this PCB or is it the same as you have always had?

Thank you so much for the help i was thinking i would not be able to achieve this idea and was going to just choose two of the three for my FX loop with a toggle , but after looking at this im going to look into using a rotary . thank you very much for the input i appreciate the help.

nice work thats awesome

I have the pcb's populated plus a smaller board with a few buffers and summing opamp . the extra control nobs are for pitch shifting, feedback runaway ,and a tone nob. the foot switches from left to right are Pitch shifting and runaway for both circuits, the next foot switch is for just the...

im thinking it may be easiest if i just get rid of the rotary alltogether and simply hook up the three FX loops with three sets of switched 1/4 inch jacks and plug my FX into the jacks im wanting.

#1,im wanting to put two Magnetron Delay PCB's in parallel in one enclosure and toggle them both on/off with a single foot switch , i figured out how to do it with a 4pdt but that would not leave any poles left for the LED i just want a single LED and could use some advice. #2, im wanting to add...

Thank you ,i put in one of those in too under the sales tab but since its after hrs i dont expect to hear anything back today, after looking at what i got and the other PCBs that look like what i got on the site im not sure what PCB i ended up with lol,but i know its not the Arachnid. im sure...

it looks like the BuGGFX is a multiband filtered delay a single FX, the demos sound cool i like it but what i ordered was a 8 FX in one pedal i had to choose what 8 FX i wanted on the EEPROM Builder, so this EEPROM chip i got wont work with the BuGGFX PCB , but you are correct they use the same...

Hello, i ordered a Arachnid MultiFX Platform with the pre soldered FV1 on July 10, 2023 ,but what i got looks like rev3 BuGGFX Daydream was wondering who do i need to contact to get my order sorted out thank you.

im testing these relays out on my bread board i was thinking the coil used 5vDC to flip but im only able to get the coil to flip with 9vDC am i just not reading the datasheet correctly ? will my coil burn out if i use it with 9vDC ? this is a picture of the relay im trying to use. thank you...

I used the worlds only set of Red Dot GT402b Germanium Transistors:cool: . This is one awesome sounding Fuzz. i changed R2 for a 100k trimmer so i could adjust Q1 collector to 0.7v then adjusted Q2 collector to 4.55 half the supply coming off the charge pump.

i was wondering whats your method of biasing these Jfets in this Plexi Drive circuit. do you use your ear or do you have a set value you aim for? if you use your ear what are you listening for?

update on my pedal , for some reason at the last moment when i was soldering everything i changed the 2n7000 for BS170 not remembering while they are pin compatible i had to flip it around . once i got that sorted the zen came to life with the most beautiful clipping . im really happy with this...

i sure do love his circuits tho, i understand the criticism with his marketing but as a new person to electronics i think his simple circuits are some of the best sounding circuits ive made and really fun to adjust to change the sound.

this whole time i thought it was an electra type in the front end. i almost tried to add an electra boost to the front of my Dover with a third foot switch , lol im glad i didnt do that. thats way different from what i was thinking. ill have to breadboard this to hear how it sounds in the DD. TY...

i think the old Schematic on line that is drawn out with blue ink pen on graph paper was changed , the guy that wrote it up later came back and said he made a mistake when he traced it the first time that one cap C4 went to ground other than that it was exactly the same .its an easy fix tho.

that big blue cap sounded so good on my Breadboard i swear LOL , when i put the fuzz into range master mode it kept a bit more low end . now it seems its way way to much low end so im going to slim that 1u down to the recommended 100nf .

C4 is kinda odd, ive seen a few schematics show C4 going to ground as a low-pass filter not as is a high pass filter as PedalPCB has it . that change seemed to make the circuit more stable on my breadboard . but because i wanted to sepperate the two circuits i needed to keep C4 as a decoupling...

the pcb is attached to the Fuzz pot and the volume of the Zen drive + about a dozen other spots with my jumpers bent at right angles. for the transistors i was planning on getting some clear heat shrink tube and put it around the body of each transistor to keep them from...