Search results

Full set for a gift for my niece and nephew. Left to right Lekato tuner looper Morning glory Magnetron delay Gravitation reverb Sandspur fuzz

Thanks everyone. Really appreciate it.

Thanks all! Mine has a silver dot on the right that you can see in the picture. Music6000 - I appreciate the first post you sent, that was going to be my follow-on question! Homebrewtj do you have a link? Thanks again Randy

I've got a duocast w an oc71 in works. Purchased from tubedepot. I see some Google info that implies the pins, progressing away from the silver mark in order are Pin 1 Collector Pin 2 Emitter Pin 3 Base Does anyone have experience w these? W multimeter my measurements are Pin 1 and...

..... removing and reinstalling the SW fixed it. Thank you! :)

Photos

I am working on a Glory Hole Overdrive. The pedal sounds great, but the LED doesn't turn off. I referenced this question: https://forum.pedalpcb.com/threads/led-won’t-turn-off.3690/ When I remove SW from the circuit board, the LED stays out. When I test for continuity on the center lug...

Color I used. Affinity designer

Love the tip, I will definitely try that on my next one

For your enjoyment. Worst, next to one of the latest. and yes, if you look close one of the pins on the BC183 is surface mounted.... very poorly. Don't ask me what got stuck in the through hole. That one is getting a rebuild eventually.

From Left to Right. Sabbath Distortion Bohemia Prince Albert Overdrive (equivalent) Captain Bit Spirit Box Tyrian Distortion Sandspur I am a fan of graffiti, so some of these are my fav artists. I got a heckofa deal on knobs, so I went with them. I'll change them out as I find the right...

Haven't had a chance to play with it yet. My guitar playing skill is low that I wouldn't want to put my opinion out there. :)

So I desoldered all of the wires on the effect side (Not the break out board side), removed, and re-added them. It resolved the problem. I got lucky, no idea which was causing the problem.

I haven't cleaned it yet, no cleaner in the house, I will work on that soon. I have tried to go one by one on the joints and reflowed any that looked concerning. I do believe I am missing something, next step is probably to desolder and re-wire the break out board. Interesting notes: I...

I have an always on LED on the pharmacist build on the Boost pedal LED. I couldn't identify the SW line on the boost pedal break out board, and had some weird continuity on the pedal. I completely removed the pedal from the break out board, and I still have the always on light. When the pedal...

This is my first fully finished, buttoned up, no more tweaking, time to just use it pedal. It is also my favorite as my son is the artist. I have nothing but thanks to everyone here. I am still a beginner to all of this, but it has already been quite the education Thank you to everyone who is...

Putting the answer down so that if someone else comes through they see it. To Re-state what others have in other threads. The board expects the pinout for BC184. Tayda sells BC184L. If you take the BC184L, protect it with heat shrink tubing (or some other method, and bend pin 1 so that it...

Darn you! and... Thank you! I reviewed the forum and was aware of the issue. I tested to make sure I knew for sure which pins were emitter and collector. I reviewed the board layout and traces to make sure I knew for sure which was the emitter / collector I waited a day, I insulated the lead...

Hey All, Accidentally learned a great toubleshooting tip today, but now I need some help. I had a boost after this pedal, with everything cranked, I was able to hear sound, but not really any of the effect I expect from the pedal. Any tips or thoughts on what might be going wrong? I'm...