buy the 1900s with the brass insert ... and don't use the deep thread open jacks like I did because I was lazy and had them lying around.Omg I have the partial kit sitting in a box and I can’t wait to get to it!!! Very nice work. Any gotchas or issues?
I don’t have one of these boards to confirm, but a quick search suggests that the dry out is meant to be used in conjunction with the vibrato mode to get pseudo-stereo phasing with a two-amp rig.mysteries still abound regarding the dry out and div pads, don't know anyone who's hooked them up
Mine came with the trimpot. I just wired my rotary switch this week. The lugs on the rotary are numbered 1 through 12. You just need to connect the 1, 2, and 3 lugs to the corresponding pads on the boardStarted this tonight. Would you mind walking me through how to wire the rotary? Also did your partial kit come with a trim pot or did you have to get one?
I wonder why the fourth setting on the rotary doesn't need a wire to the board, any idea why?buy the 1900s with the brass insert ... and don't use the deep thread open jacks like I did because I was lazy and had them lying around.
also ... the fourth setting shouldn't have a wire to the rotary switch, but I knew that going in because of other people's mistakes ... mysteries still abound regarding the dry out and div pads, don't know anyone who's hooked them up