CAESAR CHORUS

[EscobarDaniel]

Hi there people, I'm new on this forum. A friend of mine gave me the Caesar Chorus last year. so I was finishing it now, but one led (D1, across C103) was not 3mm, then I replaced bu the right one but, during the process, I damaged the metalic hole. now there is n conection and I cannot see the traces. does someone know where does D1 comes from and where does it goes? AND THANKS I ADVANCE!

 

[delayed]

Hi, the schematic is with the build instructions. But the leds goes to the switch. Power on the other ends

 

[fig]

You can jump cathode to the positive lead of C103[vref_b] or anode to pin 3 of the switch…

Edit: Looks like the cathode pad, so jump from that LED lead to the positive pad of C103 (it’s between the LEDs), but the pad farthest from that LED.

 

[EscobarDaniel]

You can jump cathode to the positive lead of C103[vref_b] or anode to pin 3 of the switch…

Edit: Looks like the cathode pad, so jump from that LED lead to the positive pad of C103 (it’s between the LEDs), but the pad farthest from that LED.

Thank you Ill try this.

 

[EscobarDaniel]

View attachment 26172Hi, the schematic is with the build instructions. But the leds goes to the switch. Power on the other ends View attachment 26173

Thank you, dude! I'm learning the basics with this pedal. so, you both confirmed my theory/ The schematic is not sequential, so I get lost when I see blocks but I think I'm learning right! Really thanks for your patience.
P.S. Forgive my bad English. Cheers!