drgonzo1969
Well-known member
This was my first go at Vero board. I screwed up cutting the board once and had to start over. Then I accidentally had the board oriented wrong and got about halfway thru populating before I realized it and had to start over. Third times a charm. once I had the meathead all populated and soldered, I wired it up to my auditorium and….. nada. Saddened.. I walked away for second then realized I forgot to plug in the power to the auditorium. 
fired right up. I would describe the sound of this as a dirty boost. I don’t get much breakup past a dirty ad/dc tone. Lots of volume boost tho. Sounds good overall. Not sure if I will box it up. Might throw it in with another fuzz or drive. Anyways Vero is fun and there are ton of other circuits I want to try. Im going to try the black arts quantum mystic later tonight. the blue tape is to keep the copper tracks from pulling up at the edges…
fired right up. I would describe the sound of this as a dirty boost. I don’t get much breakup past a dirty ad/dc tone. Lots of volume boost tho. Sounds good overall. Not sure if I will box it up. Might throw it in with another fuzz or drive. Anyways Vero is fun and there are ton of other circuits I want to try. Im going to try the black arts quantum mystic later tonight. the blue tape is to keep the copper tracks from pulling up at the edges…
