Dirty Sanchez & Bohemian build

mfilos

Member
Hey all.
These are my first PedalPCB pedals (and certainly not the last).
In general the experience was awesome and the tones coming out of these pedals is top notch! Really awesome results \m/

As for enclosure graphics, I tried to mimic the original pedals with changing a bit the placement as the LEDS, switches were in different positions. Not bad for my taste though :)
 

Attachments

  • IMG_3535.JPG
    IMG_3535.JPG
    359.2 KB · Views: 87
  • IMG_3536.JPG
    IMG_3536.JPG
    335.4 KB · Views: 82
  • IMG_3537.JPG
    IMG_3537.JPG
    468.4 KB · Views: 79
  • IMG_3538.JPG
    IMG_3538.JPG
    352.7 KB · Views: 95
  • IMG_3567.JPG
    IMG_3567.JPG
    478 KB · Views: 94
Nice builds! PedalPCB rocks! (in more ways than one :cool:)

Just a suggestion... instead of running the wires from the pots "over" the board and then soldering them on the underside (where all the other components are soldered) solder them to the "top" of the board - the PCB is designed for this, and it keeps the wires a lot shorter, especially if you're not using PCB-mounted pots.
 
Hey all.
These are my first PedalPCB pedals (and certainly not the last).
In general the experience was awesome and the tones coming out of these pedals is top notch! Really awesome results \m/

As for enclosure graphics, I tried to mimic the original pedals with changing a bit the placement as the LEDS, switches were in different positions. Not bad for my taste though :)

that looks great. How did you do the graphics on the dirty shirley?
 
Back
Top