DIY Stereo AB Box

Thanks to all who helped me figure out what my issue was with my bi-color LED, I have been able to successfully build my first pedal. A stereo AB switcher. I managed to put it all into a 1590B enclosure. I learned some valuable lessons.

IMG_6680.png

IMG_6679.jpeg
IMG_6681.jpeg
 
Last edited:
Yeah, I saw post #14 but still felt bad I'd missed the requests made when the thread was fresh.




Have you opened up a trouble-shooting thread? If so, provide the link. If not, start one and provide the link. 😉
I think I see what the problem is...
Your graphic is a little funny there.
That jumper on the center lugs shouldn't be there. Red wire to anode. Cathodes to outer lugs. Ground to center.
I'd put the CLR on the center lug
Edit, missed post on second page. Oops! :(
 
Your graphic is a little funny there.
That jumper on the center lugs shouldn't be there. Red wire to anode. Cathodes to outer lugs. Ground to center.
I'd put the CLR on the center lug
Edit, missed post on second page. Oops! :(

Well spotted!

🙀

Okay-lahhh posts #6 & #16 (ie die-a-grams) re-kajiggered... 😼
 
Back
Top