Spacelorde
New member
I've recently built a dual pedal using the Mach 1 and Blue Breaker together. the Mach 1 side does not pop at all when engaging or disengaging, it is the last circuit before the output. The Blue Breaker side pops very loudly only when engaging. I've tried a bunch of different resistor values from the output to ground on the switch to no avail. It sounds like it should as I'm very familiar with that circuit, but the popping is a no go and is uncharacteristically loud for any pedal I've ever built. I've tried just about everything I know how. Is there any was to remedy this?
Last edited:
