I use a 5meters cable to get the sound I want. Could I do with a por?A pot in front of the circuit, maybe?
The easiest way to do this would be adding capacitance. Calculate the equivalent capacitance of the length of cable you want to simulate. Add that value capacitorI saw someone made cable lenght simulator pedal, but I don´t know how it´s works
Wouldn't the capacitor you select to simulate the cable length be put across the output jack (parallel) ? The cable is acting as a capacitor shunt to ground, to attenuate high frequency.The easiest way to do this would be adding capacitance. Calculate the equivalent capacitance of the length of cable you want to simulate. Add that value capacitor in series with the signal wherever you want the simulated cable capacitance.
Yep, you're right. I'll amend the post.Wouldn't the capacitor you select to simulate the cable length be put across the output jack (parallel) ? The cable is acting as a capacitor shunt to ground, to attenuate high frequency.
So I can wire a rotary switch with caps to simulate cable lenght?Wouldn't the capacitor you select to simulate the cable length be put across the output jack (parallel) ? The cable is acting as a capacitor shunt to ground, to attenuate high frequency.
I'm still looking for a schematic to emulate cable with a switch or a knob.
Something to emulate 3, 5, 10, 20, 100 meters of cable.
Someone know How to do It?