Kliche Overdrive Issues?

[Cagno]

Currently having issues with my newly built Kliche Overdrive. When the pedal is disengaged it bypasses signal, but it still seems as if its going through a clipping circuit of some sort. And as soon as you engage the pedal it becomes a turbo fuzz face at 100% gain. Not sure what to look for or turn too.
I've attached some pictures, any help is appreciated.

 

[Robert]

Start by checking / double checking all of your resistor values.

It sounds like a gain stage is running too hot, that's probably what you're hearing in bypass as well.

 

[Cagno]

Okay, so I just found something out. IF a press the bottom of the chip where its legs are soldered to the board, it works. What does this mean.

 

[Robert]

Bad connection.

Try resoldering the pins of the IC socket first. If that doesn't help, remove the IC from the socket and reinsert it. Make sure all of the leads are making a solid connection.

 

[Cagno]

Just resoldered. not change. they are definitely making a solid connection.
When I touch the bottom of the chip it goes away, and a few seconds later it slowly fades back to chaos.

 

[Robert]

Which chip?

 

[Cagno]

TL072CP