Lycan OD questions

[Fuzz Wizard]

Firstly, what is the suggested method to removing the PCB from the board that it comes in? I don't want to harm anything. Also, Robert mentioned the pedal running at 18v. Does that mean that I need to connect this pedal to an 18v power supply, or that it runs at 18v internally with a charge pump?

 

[Robert]

I use needle-nose pliers on the outer frame portion to break each connecting tab free one at a time.

The circuit should be powered by 9V only, the charge pump generates 18V.

 

[Fuzz Wizard]

I use needle-nose pliers on the outer frame portion to break each connecting tab free one at a time.

The circuit should be powered by 9V only, the charge pump generates 18V.

One more question: Is it okay to use a 1/8w resistor while the rest are 1/4w? I only have a 1/8w 120k resistor.

 

[Robert]

1/8W is perfectly fine.