Missing Build Docs / Schematics

Looking forward to making the tone generator. Will require an order of SMD parts. Could we get a list? Also, what is a “milled” enclosure?
 
Robusto said:
Looking forward to making the tone generator. Will require an order of SMD parts. Could we get a list? Also, what is a “milled” enclosure?
Click to expand...

Yep, give me just a bit and I'll get everything posted for you.

You'll want a pre-drilled enclosure from Tayda unless you plan to do some manual filing. The mounting hole for the 1/4" output jack needs to be "slotted" to the edge of the enclosure so the PCB can drop in. I'll post a pic of mine as soon as I get up and running today.

I'm planning to have these available as a complete kit in a couple weeks as well.
 
cdw2000 said:
@Robert, I just ordered the Binaura Stereo FV-1 board. Do you have build docs for it? A schematic and partslist would be enough for me.
Click to expand...


Missing Build Docs / Schematics

Yep, I'm working to get those (that and the Isolator) posted today. The BOM is simple, I just have to finish up the drill template since you'll need appropriately sized hardware for mounting. So, following that bom, the output would be 12V ? Using the IEB0105S09 would give me a 9V output for...
forum.pedalpcb.com forum.pedalpcb.com
 
Foxbat said:
Hello any update on the Sproing Deluxe reverb BD? Thanks
Click to expand...
I'd love to see this as well. I can see the BOM, but don't know where each resistor / capacitor is supposed to go. I've seen other threads that say "swap R8 with a 10K for more reverb", but I don't know what the current value of R8 should be when buying components.
 
GuitarZero said:
I'd love to see this as well. I can see the BOM, but don't know where each resistor / capacitor is supposed to go. I've seen other threads that say "swap R8 with a 10K for more reverb", but I don't know what the current value of R8 should be when buying components.
Click to expand...
I just checked my Sproing Deluxe PCB and R8 is 10k; I do not have the regular Sproing PCB, so I can't say what R8 is for that one.
Between the pic below and board-in-hand with values silkscreened on, you're good to go.
SproingDeluxe-Panel.jpg

Sproing.jpg
 
I believe it's R8- 39K on the Sproing, 10K on the Deluxe!
The lower you go, The more spacial it gets!
I settled on 25K on my Sproing & it sounds Great!
You could use a Trimit PCB with a 50k Trimmer & you can set where you want
 
@Robert, hey bud, just wanted to take a second to thank you for dropping Docs with your new PCB releases recently. I know all of us absolutely LOVE that the parts are silkscreened on the boards, but it's always so nice to scope the schematic.

Hope you have a wonderful rest of your weekend.

My backlog of your PCBs alone is 27..........and always counting of course.
 
You must log in or register to reply here.
Back
Top