PangeaDestructor
Active member
Hey All, first post here so apologies if I'm breaking any kind of rule or etiquette. I finally got this together last night, it's my second non-working attempt. The schematic is on page 25 at http://byocelectronics.com/treminstructions.pdf. Signal goes through the pedal fine when it's switched off. When I switch it on, it still goes through clean. No effect at all. The volume pot on the pedal works fine, but the rate and depth ones do nothing whatsoever.
I checked every resistor with a MM before installing them. I'm waiting on the parts for a probe so I can try and isolate the problemn (I have no idea how to actually do that yet, especially if one of the pots is the issue), but if anything looks obvious I'd appreciate some pointers. I'm not super proud of the mess I made, but the fact that it at least allows a signal through in both switch positions means something is right and it can be fixed, hopefully. Thanks!
I checked every resistor with a MM before installing them. I'm waiting on the parts for a probe so I can try and isolate the problemn (I have no idea how to actually do that yet, especially if one of the pots is the issue), but if anything looks obvious I'd appreciate some pointers. I'm not super proud of the mess I made, but the fact that it at least allows a signal through in both switch positions means something is right and it can be fixed, hopefully. Thanks!