y2kornfreak
New member
Boost and octave channels work, but distortion channel is very finicky. Currently there is no sound coming out at all when I turn on the distortion channel hit when there was, it was very noisy and one of the distortion types on the switcher didn’t work at all. I admit I have been bending the pots back and forth because I’ve noticed it started to work after moving them but now (update) NONE of the channels are working, even with barely touching the boost/octave pots.
Only notable thing about the parts I ordered is I got the LM308 from eBay, which may or may not come from an old rat, and also, if you look closely at the board, I have accidentally skidded the solder twice where it left a white mark. It’s not deep but is that enough to damage the board?
Only notable thing about the parts I ordered is I got the LM308 from eBay, which may or may not come from an old rat, and also, if you look closely at the board, I have accidentally skidded the solder twice where it left a white mark. It’s not deep but is that enough to damage the board?