Basically a total rip off of the V2 without an expression jack. I’m going to try that on my next build. This was my first go at the reverse etch technique I got from Hexjibber.
Clipping options are 1n4148s and 1n5817/Orange LED...octave is from matched 1n5817s and sounds great.
Thanks and it took the usual amount of prep I put into an etch, which is quite a bit (wet sanding from 220 up to 1000 grit) but yesterday I finally bought a nice dewalt random orbital sander so hopefully that effort is now dwindled a bit.
Thanks and it took the usual amount of prep I put into an etch, which is quite a bit (wet sanding from 220 up to 1000 grit) but yesterday I finally bought a nice dewalt random orbital sander so hopefully that effort is now dwindled a bit.
Hahaha yeah I have tendinitis in my strong arm right now, so power tools are the only way forward! Except for the etch reveal, I’ll still do that by hand.