bluedmc777
Well-known member
Id pay for a faceplate for each build. Maybe PPCB and AmplifyFun could go in together on this.
Upvote
1
Pedal Faceplates
- Thread starter bluedmc777
- Start date
Locrian99
Well-known member
The sheepylove diptrace library has faceplate templates and you really don’t even need to learn diptrace to use them. Costs about 5$ to order a batch of 5 faceplates from
Jlcpcb. Id look into this
There’s also a blank 6-hole diptrace template shared by ppcb:
Created with DipTrace 4.3.0.3
Free for personal/commercial use, no attribution required
Free for personal/commercial use, no attribution required
bluedmc777
Well-known member
Is a computer required for this? If so no go.
Locrian99
Well-known member
Well yea it does require a computer.
Riccardo Turacchio
Member
Hey oh guys
I see here maybe I could be of some help
I have a 30 years, more or less, experience with graphic design and designing boxes is probably one of my favourite parts on the overall process....so don't esitate to contact me directly if you need
I will do it for free...
Here an example of my work
Just let me know
Peace
I see here maybe I could be of some help
I have a 30 years, more or less, experience with graphic design and designing boxes is probably one of my favourite parts on the overall process....so don't esitate to contact me directly if you need
I will do it for free...
Here an example of my work
Just let me know
Peace
Attachments
bluedmc777
Well-known member
Wow those look top notch!
