Pro-10 Blue - High cut mod?

[l8tr.dude]

Anyone have any idea what the new high cut is in the Browne Carbon V2? I built a Pro-10 Blue and it sounds great but would love to add this.

The Carbon Overdrive — Browne Amplification

browneamps.com

From the website :
The center position is the OG, unaltered Carbon. Swiping left produces a subtle high-cut, flip it all the way to the right and you have a slightly more dramatic reduction in the highest frequencies.

 

[HamishR]

It could be done quite a few ways. They could have added a couple of small caps to C6 or C7 via the switch. Or it could just be the switch is adding either one of two small caps either side of C10. I'm not really sure it's worth getting too excited about! It's the sort of thing that if I thought the pedal was too bright I would just find the treble snubber I liked and solder it in.

But it won't be complex. I'm sure you'll be able to add it easily to your pedal.

 

[l8tr.dude]

Figured it was simple but was hoping someone knew or had a gut shot so we could see the values.

 

[Fabulous]

Hello, I Think the high cut Toggle switch on the Carbon V2, it’s the same as the Glory hole overdrive (JHS Morning Glory clone) schematic .
Have à Nice day.

 

[l8tr.dude]

Hello, I Think the high cut Toggle switch on the Carbon V2, it’s the same as the Glory hole overdrive (JHS Morning Glory clone) schematic .
Have à Nice day.

Oh cool, thanks for the info! I'm going to try this out.

 

[harmaes]

Hello, I Think the high cut Toggle switch on the Carbon V2, it’s the same as the Glory hole overdrive (JHS Morning Glory clone) schematic .
Have à Nice day.

I've instead removed the 56pf and put it on one side of a spdt and on the other side a 470pf. This helps remove some of the highs of the Pro-10 Blue which for me is on the bright side of the spectrum.