youngkong10
New member
I'm having an issue with the Pro-10 Green Overdrive I just built, the pedal seems to work fine when on, but has serious treble/volume loss in bypass. I already tried reflowing the jacks and changing the 3pdt for a fresh one with a new board. Same issue though. I checked all the resistors with a multimeter and they read fine as well. I don't understand what could be affecting the bypass since it just goes from one jack through the bottom of the switch and out the other jack? Please let me know if you have any ideas. I'll post a picture of the build but note that the 3pdt in/gnd/sw/out wires are disconnected because I was in the middle of resoldering the switch.