Sproing makes no sound

[Killstring]

Feeling super deflated. I tried moving to terminals to see if it would help with my nothing works lately issues. But nah.

Bypass works fine, but no signal and no LED when activated. I had the LED working earlier.... I just must be missing something. Anyway, here's some photos, I'm really stuck. I left the LED terminals uncut for now, as I figured I might want to adjust the height? That shouldn't be messing with anything though.

I tested the jacks for conductivity.

I'm at my wits end here.

 

[KR Sound]

I think your pos and neg are backwards?

 

[Laundryroom David]

I think your pos and neg are backwards?

Agree

 

[RetiredUnit1]

Are these soldered?

 

[jhaneyzz]

Are these soldered?

View attachment 59852

Agree.... those look mega sus...

 

[Erik S]

I think your pos and neg are backwards?

Yup.

 

[Killstring]

Ah geez, imma check that.

Y'all are the best. I get such blinders on.

 

[Killstring]

Yeah, I fundamentally misunderstood the polarity of the DC jack. Swapped those, and now it's on and works. I'mma touch up those two resistors: they look okay from the underside, but it's still sloppy.

I appreciate y'all so much, you don't even know.

 

[Killstring]

Ahhh gosh, this is what I had wrong in my Aion L5 project. Been working on that since August... I don't know why I had the DC polarities mixed up in my mind, but that did it. The L5 powered on today.

Hell yeah.