SOLVED Sunflower Fuzz

pifo

New member
Hello,

is it possible the Sunflower Fuzz to work only with a 9v battery without IC and external power supply?
I would like to use the sunflower with PNP 2SB178 transistors.

What changes are required?

Omit C5,C6 and IC
Jumper D1,jumper fron pin 8 to pin 5


Am I missing anything?
 
If I understand why you are asking the question, it is because you want to build the pedal with PNP transistors instead of NPN.

the general idea of switching a pedal from NPN to PNP is that besides the transistors you also need to change the orientation of the electrolytic capacitors. but it is not that simple, since you also may need to change the values of the resistors for the transistors.
 
Omit C5 and IC1
Jumper D1 and Pins 5/8 of IC1
Install LED backwards

There is no need to reverse any of the capacitors, and C6 can still be used as a filter cap.
Hey I am thinking of doing a sunflower build soon. If I leave it the charge pump but power it using a battery box that has a 2.1mm jack out, would it still matter if I used batteries? Trying to understand what makes fuzzes sound good with batteries, and then how a charge pump might affect that.
 
Back
Top