Swollen pickle v2 veroboard issue.

[_aj666]

Hello everyone, this is one of my very first veroboard builds after many completed and successful PPCB builds. It's the swollen pickle v2, and for some reason after it's turned on it sounds like there's a volume drop and no distortion happens. The LED turns on, and a volume drop happens. I ran through everything in the board itself and I haven't bridged anything. If anyone has some ideas, or can point me in the right direction, I'd greatly appreciate it.

 

[Locrian99]

Hello everyone, this is one of my very first veroboard builds after many completed and successful PPCB builds. It's the swollen pickle v2, and for some reason after it's turned on it sounds like there's a volume drop and no distortion happens. The LED turns on, and a volume drop happens. I ran through everything in the board itself and I haven't bridged anything. If anyone has some ideas, or can point me in the right direction, I'd greatly appreciate it.

Oh vero layouts. How i dont miss thee. So first thing i always did for trouble shooting a vero was take an xacto knofe and run it down everytrack. A few times.


I would check your voltages next on your transistors. It sounds like something isnt amplifying.

If those all look good audio probe it.