Templates for PedalPCB Tayda Enclosures

dmnCrawler

Well-known member
I added templates in SVG, PDF and Affinity Design for all Tayda PedalPCB predrilled enclosures. They are setup in a way that you can make mockups as well. I will try to create a tutorial on using them by this weekend. Enjoy and let me know if there are any problems.

 
Hey man just an FYI there's a little wonky bit sticking out on the 6 knob. See there where the lines join in the top left.

Also does Tayda print just strokes? If using Illustrator go to Object -> Path -> Outline stroke and it'll vectorise the whole stroke.
 

Attachments

  • wonky bit.JPG
    wonky bit.JPG
    34.2 KB · Views: 53
Hey man just an FYI there's a little wonky bit sticking out on the 6 knob. See there where the lines join in the top left.

Also does Tayda print just strokes? If using Illustrator go to Object -> Path -> Outline stroke and it'll vectorise the whole stroke.
Which file it that in? I would like to get it corrected. It is a remnant from the drill template. It should not be on the printable surface of the pedal. Thanks for pointing that out.
 
Which file it that in? I would like to get it corrected. It is a remnant from the drill template. It should not be on the printable surface of the pedal. Thanks for pointing that out.
I just looked at the 6 knob.

I took the liberty of making a simplified version of the 6 knob for use in Illustrator. Had to save it as a PDF though as opposed to .ai per forum rules.
 

Attachments

  • Easy 6 knob.pdf
    106 KB · Views: 82
I just looked at the 6 knob.

I took the liberty of making a simplified version of the 6 knob for use in Illustrator. Had to save it as a PDF though as opposed to .ai per forum rules.
I am sorry... I am trying to figure out what file this is from. The pdf on the site can already be opened in illustrator and is ready to be edited. I do not know where the border came from. I would like to correct the file if there are errors in it. Look at the 6 knob pdf, svg, afdesigner file? I am not sure which one.
 
I added templates in SVG, PDF and Affinity Design for all Tayda PedalPCB predrilled enclosures. They are setup in a way that you can make mockups as well. I will try to create a tutorial on using them by this weekend. Enjoy and let me know if there are any problems.

Nice one men, you rocks
 
Nice templates!

Does anyone know if these can be adapted for similar, but less common PedalPCB knob layouts? For example, could I use this 6-knob template for the Caesar by simply removing the lower middle knob and swapping the lower left for a toggle? Or the Spirit Box by removing the lower three knobs?

Are PedalPCB layouts standardized in this way, if that makes sense?
 
Nice templates!

Does anyone know if these can be adapted for similar, but less common PedalPCB knob layouts? For example, could I use this 6-knob template for the Caesar by simply removing the lower middle knob and swapping the lower left for a toggle? Or the Spirit Box by removing the lower three knobs?

Are PedalPCB layouts standardized in this way, if that makes sense?
The pot line ups are pretty standard, although a pedal with a 3 pot row has different spacing than a pedal with a 2 pot row, so the 3 and 4 will be different than the 5 and 6, and yes I think the examples you've given would work
 
Nice templates!

Does anyone know if these can be adapted for similar, but less common PedalPCB knob layouts? For example, could I use this 6-knob template for the Caesar by simply removing the lower middle knob and swapping the lower left for a toggle? Or the Spirit Box by removing the lower three knobs?

Are PedalPCB layouts standardized in this way, if that makes sense?
That is why I only included the larger and smaller. You can typically just remove the holes not used or change their size for pots and switches.
 
As someone who doesn't have any of the software to manipulate the files, do you have a way to extract coordinates for Tayda drilling easily?
 
As someone who doesn't have any of the software to manipulate the files, do you have a way to extract coordinates for Tayda drilling easily?

double, triple, check these, assume I'm an idiot, etc:
I already caught two errors since I first posted, they were small but please believe the above sentence.
led hole sizes are my personal preference. 0.2mm added to each hole for the powder coating

125b top-mounted jacks
sidedxynotes
B9.7-15.25.751/4" jack
B8.10-4.4slimline dc jack
B9.715.25.751/4" jack

2-Knob Type 1
https://www.pedalpcb.com/product-tag/2-knob-type-1/

sidedxynotes
a7.216.538.1potentiometer
a7.2-16.538.1potentiometer
a6.55*012.7LED
a12.20-45.1footswitch

3-Knob Type-1
https://www.pedalpcb.com/product-tag/3-knob-type-1/

sidedxynotes
a7.216.738.1potentiometer
a7.2-16.738.1potentiometer
a6.55*038.1LED
a7.2012.7potentiometer
a12.20-45.1footswitch

4-Knob Type-1
https://www.pedalpcb.com/product-tag/4-knob-type-1/?orderby=date

sidedxynotes
a7.216.538.1potentiometer
a7.2-16.538.1potentiometer
a7.216.512.7potentiometer
a7.2-16.512.7potentiometer
a6.55*025.5led
a12.20-45.1footswitch

5-Knob Type-1
https://www.pedalpcb.com/product-tag/5-knob-type-1/?orderby=date

sidedxynotes
a6.5*038.1LED
a7.2-20.3238.1potentiometer
a7.220.3238.1potentiometer
a7.2-20.3212.7potentiometer
a7.2012.7potentiometer
a7.220.3212.7potentiometer
a12.20-45.1footswitch


5-Knob Type-2
https://www.pedalpcb.com/product-tag/125b-5-knob-type-2/ https://docs.pedalpcb.com/project/drill/125B_5-Knob-Type-2.pdf

sidedxynotes
A7.2-20.3238.1pot
A7.2038.1pot
A7.220.3238.1pot
A7.2-20.3212.7pot
A4.4*012.7led
A7.220.3212.7pot
A12.20-45.1footswitch

6-Knob Type-1
https://www.pedalpcb.com/product-tag/6-knob-type-1/

sidedxynotes
A7.2-20.3238.1pot
A7.2038.1pot
A7.220.3238.1pot
A7.2012.7pot
A4.4*028.2led
A7.220.3212.7pot
A7.2-20.3212.7pot
A12.20-45.1footswitch
 
Last edited:
I added templates for the Derailer, Terrarium, Hydra, Pineapple, Parthenon and Parentheses to the template page I created. In the same formats as the others.

 
I added templates for the Derailer, Terrarium, Hydra, Pineapple, Parthenon and Parentheses to the template page I created. In the same formats as the others.

do you have coordinates for the parentheses to use with the Tayda drill service?
 
I added templates in SVG, PDF and Affinity Design for all Tayda PedalPCB predrilled enclosures. They are setup in a way that you can make mockups as well. I will try to create a tutorial on using them by this weekend. Enjoy and let me know if there are any problems.

Dude. This looks like some good stuff! Thank you, will read through this all!
 
Back
Top