Templates for PedalPCB Tayda Enclosures

[dmnCrawler]

I added templates in SVG, PDF and Affinity Design for all Tayda PedalPCB predrilled enclosures. They are setup in a way that you can make mockups as well. I will try to create a tutorial on using them by this weekend. Enjoy and let me know if there are any problems.

Templates

This is the place where I will put templates that I hope will help people build and produce art for their pedals. All you have to do is right lick on the links and “Save link as…”.

www.pachydermpedals.com

 

[BurntFingers]

I can save them as .ai files for you if that'd help the collection.

 

[finebyfine]

Hell yeah!

 

[SYLV9ST9R]

Great resource!

 

[bhcarpenter]

Thank you so much! This is great.

 

[BurntFingers]

Hey man just an FYI there's a little wonky bit sticking out on the 6 knob. See there where the lines join in the top left.

Also does Tayda print just strokes? If using Illustrator go to Object -> Path -> Outline stroke and it'll vectorise the whole stroke.

 

[dmnCrawler]

Hey man just an FYI there's a little wonky bit sticking out on the 6 knob. See there where the lines join in the top left.

Also does Tayda print just strokes? If using Illustrator go to Object -> Path -> Outline stroke and it'll vectorise the whole stroke.

Which file it that in? I would like to get it corrected. It is a remnant from the drill template. It should not be on the printable surface of the pedal. Thanks for pointing that out.

 

[BurntFingers]

Which file it that in? I would like to get it corrected. It is a remnant from the drill template. It should not be on the printable surface of the pedal. Thanks for pointing that out.

I just looked at the 6 knob.

I took the liberty of making a simplified version of the 6 knob for use in Illustrator. Had to save it as a PDF though as opposed to .ai per forum rules.

 

[dmnCrawler]

I just looked at the 6 knob.

I took the liberty of making a simplified version of the 6 knob for use in Illustrator. Had to save it as a PDF though as opposed to .ai per forum rules.

I am sorry... I am trying to figure out what file this is from. The pdf on the site can already be opened in illustrator and is ready to be edited. I do not know where the border came from. I would like to correct the file if there are errors in it. Look at the 6 knob pdf, svg, afdesigner file? I am not sure which one.

 

[Travis]

I added templates in SVG, PDF and Affinity Design for all Tayda PedalPCB predrilled enclosures. They are setup in a way that you can make mockups as well. I will try to create a tutorial on using them by this weekend. Enjoy and let me know if there are any problems.

Templates

This is the place where I will put templates that I hope will help people build and produce art for their pedals. All you have to do is right lick on the links and “Save link as…”.

www.pachydermpedals.com

Nice one men, you rocks

 

[sticky1138]

Nice templates!

Does anyone know if these can be adapted for similar, but less common PedalPCB knob layouts? For example, could I use this 6-knob template for the Caesar by simply removing the lower middle knob and swapping the lower left for a toggle? Or the Spirit Box by removing the lower three knobs?

Are PedalPCB layouts standardized in this way, if that makes sense?

 

[Barry]

Nice templates!

Does anyone know if these can be adapted for similar, but less common PedalPCB knob layouts? For example, could I use this 6-knob template for the Caesar by simply removing the lower middle knob and swapping the lower left for a toggle? Or the Spirit Box by removing the lower three knobs?

Are PedalPCB layouts standardized in this way, if that makes sense?

The pot line ups are pretty standard, although a pedal with a 3 pot row has different spacing than a pedal with a 2 pot row, so the 3 and 4 will be different than the 5 and 6, and yes I think the examples you've given would work

 

[dmnCrawler]

Nice templates!

Does anyone know if these can be adapted for similar, but less common PedalPCB knob layouts? For example, could I use this 6-knob template for the Caesar by simply removing the lower middle knob and swapping the lower left for a toggle? Or the Spirit Box by removing the lower three knobs?

Are PedalPCB layouts standardized in this way, if that makes sense?

That is why I only included the larger and smaller. You can typically just remove the holes not used or change their size for pots and switches.

 

[beachbum]

As someone who doesn't have any of the software to manipulate the files, do you have a way to extract coordinates for Tayda drilling easily?

 

[Feral Feline]

BIG Thanks for sharing all this cool stuff.

Heads up for the knob surrounds: the 1590DD says 1590BB.

 

[finebyfine]

As someone who doesn't have any of the software to manipulate the files, do you have a way to extract coordinates for Tayda drilling easily?

double, triple, check these, assume I'm an idiot, etc:
I already caught two errors since I first posted, they were small but please believe the above sentence.
led hole sizes are my personal preference. 0.2mm added to each hole for the powder coating

125b top-mounted jacks

side	d	x	y	notes
B	9.7	-15.2	5.75	1/4" jack
B	8.1	0	-4.4	slimline dc jack
B	9.7	15.2	5.75	1/4" jack

2-Knob Type 1
https://www.pedalpcb.com/product-tag/2-knob-type-1/

side	d	x	y	notes
a	7.2	16.5	38.1	potentiometer
a	7.2	-16.5	38.1	potentiometer
a	6.55*	0	12.7	LED
a	12.2	0	-45.1	footswitch

3-Knob Type-1
https://www.pedalpcb.com/product-tag/3-knob-type-1/

side	d	x	y	notes
a	7.2	16.7	38.1	potentiometer
a	7.2	-16.7	38.1	potentiometer
a	6.55*	0	38.1	LED
a	7.2	0	12.7	potentiometer
a	12.2	0	-45.1	footswitch

4-Knob Type-1
https://www.pedalpcb.com/product-tag/4-knob-type-1/?orderby=date

side	d	x	y	notes
a	7.2	16.5	38.1	potentiometer
a	7.2	-16.5	38.1	potentiometer
a	7.2	16.5	12.7	potentiometer
a	7.2	-16.5	12.7	potentiometer
a	6.55*	0	25.5	led
a	12.2	0	-45.1	footswitch

5-Knob Type-1
https://www.pedalpcb.com/product-tag/5-knob-type-1/?orderby=date

side	d	x	y	notes
a	6.5*	0	38.1	LED
a	7.2	-20.32	38.1	potentiometer
a	7.2	20.32	38.1	potentiometer
a	7.2	-20.32	12.7	potentiometer
a	7.2	0	12.7	potentiometer
a	7.2	20.32	12.7	potentiometer
a	12.2	0	-45.1	footswitch

5-Knob Type-2
https://www.pedalpcb.com/product-tag/125b-5-knob-type-2/ https://docs.pedalpcb.com/project/drill/125B_5-Knob-Type-2.pdf

side	d	x	y	notes
A	7.2	-20.32	38.1	pot
A	7.2	0	38.1	pot
A	7.2	20.32	38.1	pot
A	7.2	-20.32	12.7	pot
A	4.4*	0	12.7	led
A	7.2	20.32	12.7	pot
A	12.2	0	-45.1	footswitch

6-Knob Type-1
https://www.pedalpcb.com/product-tag/6-knob-type-1/

side	d	x	y	notes
A	7.2	-20.32	38.1	pot
A	7.2	0	38.1	pot
A	7.2	20.32	38.1	pot
A	7.2	0	12.7	pot
A	4.4*	0	28.2	led
A	7.2	20.32	12.7	pot
A	7.2	-20.32	12.7	pot
A	12.2	0	-45.1	footswitch

 

[dmnCrawler]

I added templates for the Derailer, Terrarium, Hydra, Pineapple, Parthenon and Parentheses to the template page I created. In the same formats as the others.

Templates

This is the place where I will put templates that I hope will help people build and produce art for their pedals. All you have to do is right lick on the links and “Save link as…”.

www.pachydermpedals.com

 

[jojofogarty01]

I added templates for the Derailer, Terrarium, Hydra, Pineapple, Parthenon and Parentheses to the template page I created. In the same formats as the others.

Templates

This is the place where I will put templates that I hope will help people build and produce art for their pedals. All you have to do is right lick on the links and “Save link as…”.

www.pachydermpedals.com

do you have coordinates for the parentheses to use with the Tayda drill service?

 

[dmnCrawler]

do you have coordinates for the parentheses to use with the Tayda drill service?

I do not. Hopefully others have them for you.

 

[burger-patty-and-bacon]

I added templates in SVG, PDF and Affinity Design for all Tayda PedalPCB predrilled enclosures. They are setup in a way that you can make mockups as well. I will try to create a tutorial on using them by this weekend. Enjoy and let me know if there are any problems.

Templates

This is the place where I will put templates that I hope will help people build and produce art for their pedals. All you have to do is right lick on the links and “Save link as…”.

www.pachydermpedals.com

Dude. This looks like some good stuff! Thank you, will read through this all!