What’s on *YOUR* workbench?
- Thread starter Bricksnbeatles
- Start date
Passinwind
Well-known member
Sure, what could go wrong?
Hal Harvey
Well-known member
NXTa Charger - US - NS Design
An AC/DC Mi-Si™ Adapter for use with NXTa Series instruments. The NXTa charger is plugged in to the NXTa instrument output jack and connects into any AC outlet; the special supercapacitor-based curcuitry charges for 60 seconds to deliver active output for up to 16 hours of performance time from...
thinkns.com
Steinberger is a pimp.
JTEX
Well-known member
One think I'm not looking forward to is having to recharge my guitar before I can play it.NXTa Charger - US - NS Design
An AC/DC Mi-Si™ Adapter for use with NXTa Series instruments. The NXTa charger is plugged in to the NXTa instrument output jack and connects into any AC outlet; the special supercapacitor-based curcuitry charges for 60 seconds to deliver active output for up to 16 hours of performance time from...
Steinberger is a pimp.
Harry Klippton
Not Interested
I've been pretty grumpy lately so I figured why not make it worse?
Double doodles!
DGWVI
Well-known member
benny_profane
Well-known member
Glad you cleaned yr dirty budholes and got some knobs on ‘em.
DGWVI
Well-known member
Had to do something, they was leakin
chris.knudson
Well-known member
Nice job. I think you did it justice.
chris.knudson
Well-known member
Oh, so many places to go with this, but I should probably just keep my hands clean an not touch that one...
DGWVI
Well-known member
chris.knudson
Well-known member
Not so much afraid, but wise enough to know better.
Nostradoomus
Well-known member
The double stackers are a go, fired right up.
Paradox916
Well-known member
I had some time last night and was able to work a little more on my saw bench, the base is squared and boxed and all the verticals in place
Maybe I will have this thing done before it gets hot.
Maybe I will have this thing done before it gets hot.
Erik S
Well-known member
Is this going to be a big outfeed table for a table saw?
Paradox916
Well-known member
Yup and a miter as well. My old house needs some work, I need to be able to rip some long boards and sheet material… running a saw on The ground gets old quick. Plus this is a great project to learn and hone joinery skills on.
Last edited:
JTEX
Well-known member
Pickup frequency response / impedance plot / guitar cable measuring setup. Of course, it didn't work properly when I had people come in to see it and hopefully learn something. Fecking Murphy!
Frequency response plots from left to right:
12' cable
5' cable
1' cable
with an Ibanez humbucker, ~10kOhm (at DC) into a 1Meg load.
Frequency response plots from left to right:
12' cable
5' cable
1' cable
with an Ibanez humbucker, ~10kOhm (at DC) into a 1Meg load.
