What's in the mailbox? 📬 📦

[andare]

What pedal can I build with these?

 

[jessenator]

What pedal can I build with these?

View attachment 95612

Instead of a talk box, you have a hum box

 

[JohnnyCreepy]

What pedal can I build with these?

View attachment 95612

Piezo and route to modulated delay. Use strings to whip kazoo for some noizee.

 

[jwin615]

What pedal can I build with these?

View attachment 95612

I built one of those with my kids during covid. Still need to do a build report

Remember how expensive parts for these were then? Even unobtanium at one point.

 

[Robert]

I built one of those with my kids during covid. Still need to do a build report

Remember how expensive parts for these were then? Even unobtanium at one point.

Maaaan toilet paper seeds were a hot commodity.

 

[andare]

I built one of those with my kids during covid. Still need to do a build report
View attachment 95665
Remember how expensive parts for these were then? Even unobtanium at one point.

it already comes with that

 

[mybud]

Fresh NC solder has arrived. No clean or not, I still clean the boards for tidiness' sake.

Almost finished the one on the right hand side, so good timing it seems.

In any case, back to work it is...

 

[Robert]

Freakin' tired of swapping tips... enough is enough.

This should speed up SMD traces a bit.

 

[PunchySunshine]

my shitty aliexpress punch finally died so I took y'all's advice and upgraded to this.

 

[jwin615]

Big day.
Bag of semi random mil-spec Germs
350x 2N1304
Finally in from Poland(no tarrifs or fees!!!):
60x Rv4077 which seems to be a Raytheon exclusive part that is an "upgrade" to the 108 and OP07. Maybe they're LT1008s that we're exclusive to Raytheon before public release?
And some Euro-Si because they were dirt cheap
600x SC108C, 50x SS125C, 50x BC177A

 

[Bricksnbeatles]

USPS trashed the box, but the contents were fine.

Expresso
Capsize
Some XLR boards
And some basic utility stuff

 

[jcpst]

Got my expresso today too. But had to make it around the damage from 80mph winds and pull away limbs to access my mailbox.

 

[PedalBuilder]

Big day.
. . .
350x 2N1304

Nice! I’m curious how the 1304’s measure. I ordered 100 of those from the same seller but they haven’t shipped yet.

 

[Mentaltossflycoon]

 

[jwin615]

Nice! I’m curious how the 1304’s measure. I ordered 100 of those from the same seller but they haven’t shipped yet.

Spot checked a few before running out and they look pretty good. 45-140 beta with max 88uA.
I'll do some more testing tonight.
Note that I didn't let them settle, just a quick tug and shove into the DCA. No duds in the 5 random pulls at least.

 

[PedalBuilder]

Spot checked a few before running out and they look pretty good. 45-140 beta with max 88uA.
I'll do some more testing tonight.
Note that I didn't let them settle, just a quick tug and shove into the DCA. No duds in the 5 random pulls at least.

Sweet, thanks!

 

[EisengesisFX]

Absolutely dope haul from Amir of Amir's Noise Devices. Already putting his daughterboards to use to simplify the ground wiring for my Moonn stuff and stoked af to build the actual circuits too, especially the Crashsync.

 

[giovanni]

Tools. It’s a new rabbit hole for me. This is an awesome staple remover that also works with nails. We are planning to reupholster some chairs so we are getting some tools. Tools.

Edit: C.S. Osborne and co. 120 1/2

 

[jwin615]

Tooobs! Of the antistatic variety.

Thanks Robert!

 

[jwin615]

And a Newark order after almost a month!