What's on the workbench?

[pricklyrobot]

The goop must stop the toan from leaking up to the spirit in the sky…

 

[Robert]

That goop ain't stopping nothing.

EDIT: Except third party repairs.

 

[zombie_rock123]

View attachment 111102

Its the attention to detail I enjoy, like spray painting the board after it's wired up so the wires get a nice base tan.

 

[Robert]

Its the attention to detail I enjoy, like spray painting the board after it's wired up so the wires get a nice base tan.

And a little on the footswitch for good measure. (I know, I know, it's supposed to be relic'd)

 

[Guardians of the analog]

View attachment 111102

Looks like some of the build reports here

 

[benny_profane]

View attachment 111102

That is a weird graham cracker.

 

[giovanni]

View attachment 111102

Alien secretion?

 

[Robert]

Double-post.... whatever. Let's roll.

 

[Guardians of the analog]

Double-post.... whatever. Let's roll.

View attachment 111132

Is that the new LPB-Monk?

 

[zombie_rock123]

Is the real goop we made the flying switch resistors we met along the way?

Is this a highly regarded pedal or did you lose a bet?

 

[Robert]

Is the real goop we made the flying switch resistors we met along the way?

Is this a highly regarded pedal or did you lose a bet?

Post in thread 'Pedal builders REACT to this guy finally cracking the Spirit In The Sky fuzz'

Yesterday at 3:48 PM

it's one of those mystery pieces of equipment that people get weird about ... I'm one of those people. I want to know the special recipe.

• Robert

• 
• 

Complete accident, but the headline + recipe is priceless.

 

[Robert]

All goop jokes aside, the pedal does sound fantastic, and all of his other non-gooped builds look pretty dang good.

 

[Robert]

 

[LukeFRC]

View attachment 111206

A logical response to the tariffs on anything from JLCPCB?

 

[Robert]

A logical response to the tariffs on anything from JLCPCB?

I've decided to phase out PCBs and start offering pre-cut veroboard instead.


It was a "quick and easy" trace verification, and I figured this way I could go ahead and put the original back together. (I usually leave them disassembled until time to verify the PCB)

My work area could be featured on an episode of Hoarders so I'm really trying to do better. I actually sold five pedals last week and only ordered two. Progress.

It was fun to play with stripboard again, it's been years since I fooled with that stuff.... I think I'm good for a while.

 

[CR0SSBL4DE]

View attachment 111102

Yuck

 

[pbrommer]

I've decided to phase out PCBs and start offering pre-cut veroboard instead.


It was a "quick and easy" trace verification, and I figured this way I could go ahead and put the original back together. (I usually leave them disassembled until time to verify the PCB)

My work area could be featured on an episode of Hoarders so I'm really trying to do better. I actually sold five pedals last week and only ordered two. Progress.

It was fun to play with stripboard again, it's been years since I fooled with that stuff.... I think I'm good for a while.

Once you start fooling with stripboards, you’ll start getting into the hard stuff: perfboard, wire wrapping, and dead bugging your prototypes.

 

[Feral Feline]

Oh well, it was nice knowing you all.

All shipments of PedalPCB boards will have recently come with a single strand of goop, the same goop that infected Robert, the goop that will infect any/all of us who ordered PCBs recently...


This is our fate...

 

[Robert]

This is our fate...

Don't worry, I saved it for you.