What’s on *YOUR* workbench?

[jimilee]

Finally pieced together this JM. It's a purply MJT body that I paid extra to have dinged up.... The neck is from Musikraft and is 3A QS roasted maple that really ties this baby together adorned with Hipshot vintage machine heads. The CuNiFi pups don't hinder the cause, and the Mastery bridge is indeed that. I'm not a huge fan of the tremolo but it's there (for sure) if I get a hankerin'.

View attachment 58819
View attachment 58820
View attachment 58821

I love everything about it.

 

[swelchy]

Todays workbench was swap all my stuff over to a bigger board… My volume pedal went out during rehearsals last week at church … started making a crazy squeeling noise.. Bought a new one and swapped all the pedals to The bigger board I have

 

[Silver Blues]

View attachment 58781

I've settled into a process of lettering with Posca markers, then top coating with aerosol clear coat, but I live in the northeast US where the winters are long and too cold for painting outside.

Around when the "what does your backlog look like" thread got posted, I realized I had a lot of boards I'd like to build over the winter, but no plan for the enclosures.

This stockpile should be enough to keep me busy for a while.

Looks sweet!! Are these all Tayda enclosures? What colour is the one in the very middle of the bottom row?

 

[Erik S]

Looks sweet!! Are these all Tayda enclosures? What colour is the one in the very middle of the bottom row?

Thanks! Almost all tayda. One SBP “blue vein” 1590bb at top center.

Pretty sure bottom center is a tayda “glimmer brown sugar”.

 

[szukalski]

A new revision to my rock before (if) you box board. A pogo pin adapter with a relay and on(off) switch.

Makes testing so much easier.

 

[fig]

A new revision to my rock before (if) you box board. A pogo pin adapter with a relay and on(off) switch.

Makes testing so much easier.

I have some of those as well..I modified a couple to mimic common pcb spacing (e.g. PPCB power pads). I agree, they work really well!

 

[KR Sound]

That’s slick!

 

[Harry Klippton]

A new revision to my rock before (if) you box board. A pogo pin adapter with a relay and on(off) switch.

Makes testing so much easier.
View attachment 58862View attachment 58863

I'm not sure I even know what's going on here

 

[jimilee]

 

[KR Sound]

Replaced a blown diode on the Kliche boost side of this dual setup with the Cheesemonger. Seems like everything else is ok!

 

[DeadAirMD]

View attachment 58382
Because I never learn and always talk myself into doing ridiculous …. I said I wasn’t going to do this sort of stuff anymore, but here we are, knee deep…. To late to turn back now.

Nice! How did you connect your expression jack to your board? It looks like you soldered it to the pot? What's going on here? Very interested!

 

[Paradox916]

Nice! How did you connect your expression jack to your board? It looks like you soldered it to the pot? What's going on here? Very interested!

It’s pretty easy here’s the build report with some more details. https://forum.pedalpcb.com/threads/paracitic-terraformer-ppcb-arachnid.19187/#post-235782

There is a diagram with exactly how to do it in there. Hopefully that helps.

 

[KR Sound]

This Omnifixo M4 is pretty cool.

 

[Laundryroom David]

Finally getting around to that Ibanez fuzz from DEFx

 

[Harry Klippton]

Finally getting around to that Ibanez fuzz from DEFx

View attachment 59029

 

[Laundryroom David]

This Omnifixo M4 is pretty cool.

View attachment 59028

I think having those would really enrich my environment. Hmmmm

 

[Laundryroom David]

 

[Laundryroom David]

Despite my better judgment, I’m about to test about 100 ge diodes to find a matching pair … I hope

 

[steviejr92]

Phew this was a lot of work but I can finally get onto the powder coating!

 

[Erik S]

Phew this was a lot was a lot of work but I can finally get onto the powder coating!
View attachment 59030

Nice lookin batch!!