Laundryroom David
Keyboard Cowboy 🤠
The build docs are available. If you just need switch wiring help, you can check out https://docs.pedalpcb.com/project/Finale-PedalPCB.pdf
Missing Build Docs / Schematics
- Thread starter Robert
- Start date
ctelecaster
Member
Could we get the schematic for the Panhandle/OD-850?
hellsparrow
New member
TheCrookedMan
Member
Just got my Low Tide Mini PCBs in the mail today, but I didn't realize that there still isn't a parts list up. Can someone maybe just post what is needed in addition to or as a replacement for the parts on the full size Low Tide BOM, like the specific headers? I'm good on sourcing low profile caps, but are there any other parts where space is an issue?
Seasoned Novice
Member
Usually when I get pcbs that don't have documentation online, I'll make a list from the silkscreen on the PCB and go off of that. Alternately, you can search the forum for the BOM.
jimilee
Well-known member
Same, I've found it easier, as a matter of fact. I'm not looking at a BOM and a board, just a board.
TheCrookedMan
Member
Sure, but they're 2d, and since this is a stacked 2 pcb pedal there could be issues that wouldn't address, like component height and what length headers to use. There could also be other recommendations for smaller components since each board is smaller than the original/full size version.
BrownMagic
New member
Hello! Does anyone have the schematic for the Cadet Fuzz? I know it's based on the EQD, which is based on the Ace Tone, but I would like to confirm any changes that are made for this PCB.
Thank you!
Thank you!
Robusto
Active member
Would like also.
hellsparrow
New member
Fama
Well-known member
Is there some specific question you have? I built one without any issues, although can't help you with the schematic.
fontoponto
Well-known member
I know it gets old but is there a reason why the flock documentation is still missing? Is it some kind of a secret?
Cybercow
Well-known member
I found the schematic somewhere in the forum and the wiring for the 4PDT stomp daughterboard. And I've included the gutshot from mine.
The component values are marked in silkscreen on the PCB.
Thank you so much for that.
I thought I'd read all the Binaura and FV-1 threads, but I never came across that schematic.
I'd still like to see the official BOM (it's my OCD(not the pedal)).
I know I could take values from the PCB/schematic, but I don't have the PCB yet and I'd like to order the parts before getting the PCB.
And I do prefer working from a proper BOM so that nothing is missed and component types are correct.
Anyway, you've given me enough to get it done so I guess I need to get on and make it happen.
Thanks again.
Robert
Reverse Engineer
Not quite "proper" but it lists everything you need.
