Not there yet, but any chance you have the drill templates ? What height of standoff are you using in general for those ?
Missing Build Docs / Schematics
- Thread starter Robert
- Start date
Hal Harvey
Well-known member
Is there a existing build doc with a drill template that would work for the Scabbard?
It's a good one
It's a good one
Robert
Reverse Engineer
Is there a existing build doc with a drill template that would work for the Scabbard?
It's a good one
This is only for the current (Rev1) PCB. The pots will be brought in closer to the center in the next revision/restock.
chris.knudson
Well-known member
Did you ever post the drill template for these?
Will the schem/comprehensive build doc be posted with the next revision/restock?
Robert
Reverse Engineer
I thought you were talking about the Comprehensive Drive. I was like "Huh? It's already up".
It's on my list, just a few head of it.
Leftovernoise
Active member
Looking for the build doc for the akronym or at least the bill of parts so I can get some parts organized. Thanks
PangeaDestructor
Active member
Two Tone Fuzz, other than the two toggles, is it a standard PPCB 4 knob drill template?
Robert
Reverse Engineer
The pots are spaced further apart. I believe the closest existing template is the Crunch Captain Deluxe, omitting the center column of pots.
Fama
Well-known member
So the rev 1 is not an existing drill template either (well, I'm more interested in the Tayda options, but same thing really)?
I am looking for schematics on the 4 tap isolator and and usb power converter. I would like to learn how to scale the 4 taps up to have more outputs. Conversely, I would like to also see how to do only one isolated tap. I apologize if it is really obvious how to accomplish these two things. Thanks!
Lytt Effects
Active member
Any update on the build docs for the Pro-10 Dual Overdrive?
Hal Harvey
Well-known member
Twin Town Fuzz. I built this, I love it. Seriously great take on the TB.
On the original pedal "Impedance" is on the left and "Bias" is on the right.
The PCB art on the store page has these two controls flipped. The rest of the controls match the original. Is the PCB art on the store page correct?
I don't have it hooked up to my auditorium any more to confirm and I'd like to make art for it.
On the original pedal "Impedance" is on the left and "Bias" is on the right.
The PCB art on the store page has these two controls flipped. The rest of the controls match the original. Is the PCB art on the store page correct?
I don't have it hooked up to my auditorium any more to confirm and I'd like to make art for it.
PangeaDestructor
Active member
For the Scabbard, I have d9e diodes on hand. Those are going to be just fine, right, or do I really need to seek out the d9b for this.
fontoponto
Well-known member
You should be fine with what you have.
Check the graph:
Edit: for some reason the graph is not visible on chrome. if you can’t see it just read the text.
Check the graph:
Last edited: