scheffehcs
Well-known member
Had a request from a friend visiting from overseas to build a her a Blues Driver before going back home. Thanks to PedalPCB, Tayda, Small Bear, and the good ol’ USPS, I got all the parts and built it in under two weeks! Luckily finished it the day before her flight. It sounds great. I was able to AB it with a real one and it’s pretty darn close. Can’t even remember the subtle differences.
I also subbed the dual gang A250k for a100k, plus subbed the appropriate resistors and caps - thanks to Chuck’s great BD-2 breakdown.
I also subbed the dual gang A250k for a100k, plus subbed the appropriate resistors and caps - thanks to Chuck’s great BD-2 breakdown.
A250k | A100k | ||
R8 | 1.5K | 620 | Req'd if changing GAIN pot to 100K. |
R10 | 22K | 9.1K | Req'd if changing GAIN pot to 100K. |
C4 | 150nF | 390nF | Req'd if changing GAIN pot to 100K. |
C5 | 47pF | 120pF | Req'd if changing GAIN pot to 100K. |