Recent content by Pedal_man86

  1. P

    Small question on Backfeeder build

    Would an A10k be alright or would the taper throw it off too much?
  2. P

    Uber Drive Mods

    Tried a Boss SD-1 and really liked it, so I bought the Uber Drive. Are there any good mods to lower the gain a little bit?
  3. P

    Clandestine Issues

    Built the Clandestine Preamp, works okay for the most part but I'm having a few issues. 1) The volume has a slight drop once the pot is turned all the way up 2) Not much, if any, difference between the mid and the dark settings. 3) The bias voltage seems a little strange, the lowest voltage I...
  4. P

    Brighten up a Tube Screamer

    I was saying the 808 was dark compared to the XB-MB
  5. P

    Brighten up a Tube Screamer

    Built an 808 clone and compared to the XB-MB I built, it's kind of dark. I know I could use LEDs for the clipping diodes but that's not really the type of gain I want from the pedal. Any other ways I could brighten it up?
  6. P

    XB-MB -Xotic BB Volume Pot

    I noticed the volume pot is a linear taper and was wondering if it would affect anything if I changed it out for an audio taper instead. The volume jumps up real quick
  7. P

    Build docs for Sproing Deluxe Reverb

    What printer settings am I supposed to use for this? I printed one out and the spacing between the pot/lug centers on the board doesn't match up with the spacing on the template...
  8. P

    Cleaver Boost Muffled

    I'm looking at a build doc that I googled, think my 100nf might need to be 100pf?
  9. P

    Cleaver Boost Muffled

    Think that's where I'm at right now, checked it just in case
  10. P

    Cleaver Boost Muffled

    I don't know what it's supposed to be, no build docs are available yet...
  11. P

    Cleaver Boost Muffled

    Just built this cleaver boost and the sound is muffled, like a tone knob is rolled all the way down. Not sure what I did wrong...
  12. P

    Double Jeporady Solo Boost Issue

    Built the Double Jeporady Boost, and I'm reading around 12 volts with the trim pots turned all the way down...
  13. P

    Fuzz Face Voltage Starve/Dying Battery Mod

    I'd like to add a voltage starve circuit in my fuzz face build and was wondering if anyone had a diagram for this type of mod. I've also heard there's various ways of doing it, any info would be greatly appreciated.
  14. P

    Angry Andy Wiring Diagram

    Anyone have the wiring diagram for the Angry Andy +? Wondering what boards I need for each footswitch...
  15. P

    Angry Andy Build Docs - Drill Template

    Anyone have a copy of the Angry Andy Plus drill template?
Back
Top