SOLVED Prismatic Distortion 2 -not working

[rhodalubbish]

Hi, made a Prismatic not long ago which didn't work. Nostradoomus was kind enough to find a basic mistake I had made.
So with that eventual success I thought Id make another for a mate, carefully avoiding the same mistake.
And I must have made yet another mistake.
There's no sound, the LED doesn't light.
Once again any help would be appreciated.
Cheers

 

[chongmagic]

Do you have sound in bypass? If not something is awry at the footswitch or jacks. No LED, either the LED is in backwards or there is no voltage running to it. Check the voltages with a DMM. I can't tell from the pic, but also check that the 1n5817 is not in backwards.

 

[Robert]

Your red wire needs to move to the other lug of the DC jack.

You have it connected to the Battery lug currently, it needs to be connected to the +9V lug.

 

[rhodalubbish]

Thanks to both of you. The battery connection was wrong and the LED was reversed too. Its now working fine.
Cheers guys.