REQUEST PedalPCB 4 Tap DC Converter/Isolator 1590A

[drgonzo1969]

Does anyone have a tayda drill template for the PedalPCB 4 Tap DC Converter/Isolator 1590A?

https://drill.taydakits.com/box-designs/new

 

[Nic]

I had one but the spacing was not perfect... like maybe missing 1mm between holes. It's working though.

 

[Nic]

Looking back at it with fresh eyes this morning... 1mm too far apart. That one was drilled at 22mm distance and I already adjusted my drill template to 21mm but have not tested it yet... holes could be a little smaller if I was certain about the placement.
Anyway, here it is : https://drill.taydakits.com/box-designs/new?public_key=SXBFVGhsTUpSaFh6d1MzUjN1ZDNyUT09Cg==

EDIT : Hole size is good as is.

 

[andrewsrea]

I've DYI'ed a similar concept for a 125B type enclosure. 18vDC 1.5A input supply, a 9vDC (LM317T) regulator trimmed to 9v and filtered, (5) 9vDC isolated outputs and (2) 18vDC inputs.

If i can fit this with Terro board, PedalPCB can surely fit it with their double sided layiouts!

 

[drgonzo1969]

Looking back at it with fresh eyes this morning... 1mm too far apart. That one was drilled at 22mm distance and I already adjusted my drill template to 21mm but have not tested it yet... holes could be a little smaller if I was certain about the placement.
Anyway, here it is : https://drill.taydakits.com/box-designs/new?public_key=SXBFVGhsTUpSaFh6d1MzUjN1ZDNyUT09Cg==

EDIT : Hole size is good as is.

Hell yeah! Thanks for posting that

 

[Nic]

And that's fitted with the following, as suggested by M. PedalPCB himself, I may have added a washer so it's snug.
5mm Male standoff paired with a 20mm Female standoff

 

[drgonzo1969]

I've DYI'ed a similar concept for a 125B type enclosure. 18vDC 1.5A input supply, a 9vDC (LM317T) regulator trimmed to 9v and filtered, (5) 9vDC isolated outputs and (2) 18vDC inputs.

If i can fit this with Terro board, PedalPCB can surely fit it with their double sided layiouts!

That’s a very interesting idea. I bought two but I hadn’t thought of boxing them together

 

[Nic]

I have a 24V 6A power brick and am tempted to build a bigger power supply based on the old Anasounds files...

fx power source - 8x 9v, 2x 12v and 2x 18v - full kit | Anasounds

With this FX Power Source kit, you can build a powerful power supply for a pedalboard with up to 8 pedals 9V, 2x 12V and 2x 18V!

anasounds.com

 

[ThePanda]

I shoulda grabbed some of these while they were in stock!

 

[Robert]

I have a 24V 6A power brick and am tempted to build a bigger power supply based on the old Anasounds files...

I really like that modular design...