Chalumeau mods

[Bricksnbeatles]

What mods are most worthwhile in your opinions? I've been looking for a cool pt2399 based effect to build for my 23rd birthday next month, and last night I settled on the Chalumeau.

First off is the matter of gain- If I understand correctly, the gain of the 386 in the circuit is 200, due to pins 1 and 8 being tied directly together. that should mean that c2 and r2 are completely redundant in this circuit, as they'll only set the gain if pins 1 and 8 aren't shorted together. c2 and r2 should give the gain of the non-fuzz version of the Clari(not) if you cut the trace between pins 1 and 8. of course, you could always cut the trace, populate r2 and c2, and connect a spst between pins 1 and 8 if you want both versions of the circuit, but why not take this in a different direction and just do a gain pot? If we cut the trace between pins 1 and 2, and then also leave c2 and r2 unpopulated, then we should be able to wire up a 1KΩ pot between pins 1 and 8 for a continuously variable gain between (I think, I'm doing mental math rn) 40 and 200. any thoughts or corrections here? I haven't double checked my calculations yet...

Next is the mater of delay feedback. more on that soon...

 

[zgrav]

I put in a spdt between pins 1 and 8 with an on/off/on switch and used the extra "on" position to have a resistor in the connection between the two IC pins to get a third gain option).

 

[Betty Wont]

I put a clean boost on the fuzz lift switch to give it enough juice to trigger in "clean" mode. The delay feedback mod is easy, but due to the extreme pitch shifting, it is pretty much unusable as an echo.

 

[Bricksnbeatles]

I put a clean boost on the fuzz lift switch to give it enough juice to trigger in "clean" mode. The delay feedback mod is easy, but due to the extreme pitch shifting, it is pretty much unusable as an echo.

Since I plan on doing a pot instead of a fuzz lift switch, maybe I’ll just add an LPB to the front end. As for the feedback mod— unusable isn’t in my vocabulary (plus with the modulation turned mostly down, it should be marginally normal)

 

[Bricksnbeatles]

Also can anyone who’s built this describe what the tracking knob does? Every demo I’ve seen adjusts at least one other knob when they adjust the tracking so it’s hard to see exactly what it does

 

[Betty Wont]

The tracking knob stabilizes the randomness of the vibrato. At one extreme the vibrato is controllable, at the other it is wow and flutter town.

 

[benny_profane]

The tracking knob stabilizes the randomness of the vibrato. At one extreme the vibrato is controllable, at the other it is wow and flutter town.

Yep. Take a look at the schematic, @Bricksnbeatles. It essentially controls the signal routing to the LED, which affects the LDR tied to the DEPTH control.

 

[Bricksnbeatles]

Yep. Take a look at the schematic, @Bricksnbeatles. It essentially controls the signal routing to the LED, which affects the LDR tied to the DEPTH control.

Ok yeah I see, it’s sort of controlling the envelope depth, like the range knob on an envelope filter (or well, the range knob on some envelope filters, or the sensitivity knob on other envelope filters, or the depth knob on some envelope filters because sometimes range and sensitivity do other things because envelope filter parameter naming is extremely inconsistent )

 

[Bricksnbeatles]

Just occurred to me I could very easily omit having a switch to remove the feedback circuit by simply modding a C50k pot to be ‘no load’.
That should free up some real estate

 

[Bricksnbeatles]

Any thoughts on which LDR is best for this circuit? I’ll probably socket it just so I can try ‘em all out, but I’m in a rush to finish this up and don’t have time to test each type out.

Photo Conductive Cell Resistor LDR 650nm 10KΩ to 20KΩ RADIAL KE-10720

WAITRONY - Get It Fast - Same Day Shipping

www.taydaelectronics.com

Photo Conductive Cell Resistor LDR 650nm 10KOhm to 15Kohm RADIAL KE-10715

WAITRONY - Get It Fast - Same Day Shipping

www.taydaelectronics.com

Photo Conductive Cell Resistor LDR 540nm RADIAL 5528

Tayda Electronics - Get It Fast - Same Day Shipping

www.taydaelectronics.com

I’ve got about a dozen of each, so I can cherry pick the best-spec one, but not sure what range is best for the circuit

 

[neiltheseal]

I put a clean boost on the fuzz lift switch to give it enough juice to trigger in "clean" mode. The delay feedback mod is easy, but due to the extreme pitch shifting, it is pretty much unusable as an echo.

Hey, I know this is old, but can you please tell me how you did this? I'm thinking of doing the same thing.

 

[DGWVI]

I've probably said it elsewhere, but the HT8970 is cool in this circuit. Lower minimum delay times, so it's a lil thicker sounding and more chorusy

 

[Manischewitz_Papi]

Hi, so sorry to be necroposting but I figured in lieu of a new thread I'd ask here:

On the PedalPCB board, how would I add a gain pot? It's my first time do a mod involving precarious IC leg work.

 

[DailyDovetails]

If you pull up pins 1 and 8 like in this pic.

Then solder either a switch that goes between open and closed and you will get a 20 gain and 200 gain setting or wire in a 1K pot and you can have a range. It’s an easy mod as the work is all done to the IC so if you mess up you can just get another as long as you use a socket.